; generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-02-10 at 16:06:10 UTC

; 

; external perimeters extrusion width = 0.45mm
; perimeters extrusion width = 0.45mm
; infill extrusion width = 0.45mm
; solid infill extrusion width = 0.45mm
; top infill extrusion width = 0.40mm
; first layer extrusion width = 0.42mm

M201 X500 Y500 Z100 E5000 ; sets maximum accelerations, mm/sec^2
M203 X500 Y500 Z10 E60 ; sets maximum feedrates, mm/sec
M204 P500 R1000 T500 ; sets acceleration (P, T) and retract acceleration (R), mm/sec^2
M205 X8.00 Y8.00 Z0.40 E5.00 ; sets the jerk limits, mm/sec
M205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec
M107
;TYPE:Custom
G90 ; use absolute coordinates
M83 ; extruder relative mode
M104 S230 ; set extruder temp
M140 S60 ; set bed temp
M190 S60 ; wait for bed temp
M109 S230 ; wait for extruder temp
G28 ; home all
G29 ; bedlevel
G1 X2 Y10 F3000
G1 Z0.28 F240
G92 E0.0
G1 Y190 E15.0 F1500.0 ; intro line
G1 X2.3 F5000
G1 Y10 E30 F1200.0 ; intro line
G92 E0.0
G1 Z15 F9000
G1 Y100 F9000
G1 X5 F9000
G21 ; set units to millimeters
G90 ; use absolute coordinates
M83 ; use relative distances for extrusion
; Filament gcode
M107
;LAYER_CHANGE
;Z:0.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;0.2


G1 E-5 F6000
G1 Z.5 F9000
;AFTER_LAYER_CHANGE
;0.2
G1 X99.39 Y108.885
G1 Z.2
G1 E5 F2400
;TYPE:Skirt/Brim
;WIDTH:0.42
G1 F1200
G1 X100.049 Y108.498 E.02395
G1 X100.785 Y108.295 E.02395
G1 X101.19 Y108.265 E.01271
G1 X134.01 Y108.265 E1.02908
G1 X135.428 Y108.658 E.04612
G1 X136.441 Y109.724 E.04612
G1 X136.765 Y111.02 E.04186
G1 X136.765 Y123.98 E.40638
G1 X136.372 Y125.398 E.04612
G1 X135.306 Y126.411 E.04612
G1 X134.01 Y126.735 E.04186
G1 X101.19 Y126.735 E1.02908
G1 X100.091 Y126.519 E.03511
G1 X99.426 Y126.142 E.02395
G1 X98.882 Y125.606 E.02395
G1 X98.495 Y124.948 E.02395
G1 X98.292 Y124.211 E.02395
G1 X98.262 Y123.807 E.01271
G1 X98.286 Y110.833 E.40678
G1 X98.478 Y110.094 E.02395
G1 X98.854 Y109.43 E.02395
G1 X99.348 Y108.928 E.02207
G1 X99.615 Y109.19 F9000
G1 F1200
G1 X100.193 Y108.847 E.02109
G1 X101.19 Y108.643 E.03189
G1 X134.01 Y108.643 E1.02908
G1 X135.318 Y109.034 E.04278
G1 X136.194 Y110.08 E.04278
G1 X136.388 Y111.02 E.03008
G1 X136.388 Y123.98 E.40638
G1 X135.996 Y125.287 E.04278
G1 X134.95 Y126.164 E.04278
G1 X134.01 Y126.357 E.03008
G1 X101.19 Y126.357 E1.02908
G1 X100.235 Y126.171 E.0305
G1 X99.656 Y125.843 E.02086
G1 X99.181 Y125.377 E.02086
G1 X98.843 Y124.804 E.02086
G1 X98.639 Y123.807 E.03189
G1 X98.66 Y110.883 E.40524
G1 X98.826 Y110.238 E.02087
G1 X99.154 Y109.659 E.02086
G1 X99.573 Y109.233 E.01875
G1 E-3.5 F6000
;WIPE_START
G1 F7200
G1 X100.193 Y108.847 E-.57854
G1 X101.19 Y108.643 E-.80513
G1 X101.242 Y108.643 E-.04133
;WIPE_END
G1 E-.075 F6000
G1 Z.7 F9000
G1 X104.339 Y112.738
G1 Z.2
G1 E5 F2400
;TYPE:Perimeter
G1 F1200
G1 X132.292 Y112.738 E.87646
G1 X132.292 Y122.262 E.29861
G1 X102.735 Y122.256 E.92674
G1 X102.735 Y121.463 E.02488
G1 X126.164 Y121.456 E.73461
G1 X127.051 Y120.944 E.03211
G1 X127.504 Y120.16 E.0284
G1 X127.57 Y119.658 E.01589
G1 X127.57 Y115.229 E.13886
G1 X127.397 Y114.58 E.02106
G1 X126.949 Y113.996 E.02307
G1 X126.267 Y113.603 E.02468
G1 X125.765 Y113.537 E.01588
G1 X102.738 Y113.533 E.722
G1 X102.739 Y112.738 E.02493
G1 X104.279 Y112.738 E.04829
G1 X103.562 Y112.361 F9000
G1 F1200
G1 X132.669 Y112.361 E.91264
G1 X132.669 Y122.639 E.32226
G1 X102.358 Y122.633 E.95039
G1 X102.358 Y121.086 E.04852
G1 X126.063 Y121.079 E.74326
G1 X126.775 Y120.668 E.02578
G1 X127.14 Y120.036 E.02288
G1 X127.193 Y119.633 E.01276
G1 X127.193 Y115.278 E.13653
G1 X127.052 Y114.75 E.01715
G1 X126.695 Y114.285 E.01837
G1 X126.143 Y113.967 E.01998
G1 X125.74 Y113.914 E.01275
G1 X102.36 Y113.91 E.73306
G1 X102.362 Y112.361 E.04857
G1 X103.502 Y112.361 E.03574
G1 X102.785 Y111.984 F9000
G1 F1200
G1 X133.046 Y111.984 E.94881
G1 X133.046 Y123.016 E.34591
G1 X101.981 Y123.01 E.97404
G1 X101.981 Y120.709 E.07216
G1 X125.962 Y120.702 E.75191
G1 X126.499 Y120.392 E.01944
G1 X126.776 Y119.913 E.01736
G1 X126.816 Y119.608 E.00963
G1 X126.816 Y115.328 E.1342
G1 X126.707 Y114.92 E.01324
G1 X126.442 Y114.574 E.01366
G1 X126.02 Y114.331 E.01527
G1 X125.715 Y114.291 E.00963
G1 X101.983 Y114.287 E.74412
G1 X101.985 Y111.984 E.07222
G1 X102.725 Y111.984 E.0232
G1 X102.009 Y111.607 F9000
G1 F1200
G1 X133.423 Y111.607 E.98499
G1 X133.423 Y123.393 E.36956
G1 X101.603 Y123.387 E.99769
G1 X101.604 Y120.332 E.0958
G1 X125.861 Y120.325 E.76056
G1 X126.223 Y120.116 E.01311
G1 X126.412 Y119.789 E.01184
G1 X126.439 Y119.583 E.00651
G1 X126.439 Y115.378 E.13187
G1 X126.362 Y115.09 E.00933
G1 X126.188 Y114.864 E.00896
G1 X125.896 Y114.695 E.01057
G1 X125.691 Y114.668 E.0065
G1 X101.605 Y114.664 E.75518
G1 X101.609 Y111.607 E.09586
G1 X101.949 Y111.607 E.01066
G1 X101.232 Y111.23 F9000
;TYPE:External perimeter
G1 F1200
G1 X133.8 Y111.23 E1.02116
G1 X133.8 Y123.77 E.39321
G1 X101.226 Y123.765 E1.02134
G1 X101.227 Y119.955 E.11945
G1 X125.76 Y119.948 E.76921
G1 X125.947 Y119.84 E.00677
G1 X126.048 Y119.666 E.00632
G1 X126.062 Y119.559 E.00338
G1 X126.062 Y115.427 E.12954
G1 X126.017 Y115.26 E.00542
G1 X125.935 Y115.153 E.00426
G1 X125.773 Y115.059 E.00587
G1 X125.666 Y115.045 E.00338
G1 X101.228 Y115.041 E.76625
G1 X101.232 Y111.29 E.11762
G1 X101.632 Y111.25 F9000
G1 E-5 F6000
G1 Z.7 F9000
G1 X103.495 Y113.345
G1 Z.2
G1 E5 F2400
;TYPE:Solid infill
;WIDTH:0.420013
G1 F1200
G1 X103.247 Y113.096 E.01101
G1 X103.78 Y113.096 E.01672
G1 X103.859 Y113.175 E.00349
G1 X104.392 Y113.175 E.01672
G1 X104.313 Y113.096 E.0035
G1 X104.847 Y113.096 E.01672
G1 X104.925 Y113.175 E.0035
G1 X105.459 Y113.175 E.01672
G1 X105.38 Y113.096 E.0035
G1 X105.913 Y113.096 E.01672
G1 X105.992 Y113.175 E.00351
G1 X106.526 Y113.175 E.01672
G1 X106.446 Y113.096 E.00351
G1 X106.98 Y113.096 E.01672
G1 X107.059 Y113.175 E.00352
G1 X107.592 Y113.176 E.01672
G1 X107.513 Y113.096 E.00352
G1 X108.046 Y113.096 E.01672
G1 X108.126 Y113.176 E.00352
G1 X108.659 Y113.176 E.01672
G1 X108.58 Y113.096 E.00353
G1 X109.113 Y113.096 E.01672
G1 X109.192 Y113.176 E.00353
G1 X109.726 Y113.176 E.01672
G1 X109.646 Y113.096 E.00354
G1 X110.179 Y113.096 E.01672
G1 X110.259 Y113.176 E.00354
G1 X110.793 Y113.176 E.01672
G1 X110.713 Y113.096 E.00354
G1 X111.246 Y113.096 E.01672
G1 X111.326 Y113.176 E.00355
G1 X111.859 Y113.176 E.01672
G1 X111.779 Y113.096 E.00355
G1 X112.313 Y113.096 E.01672
G1 X112.393 Y113.176 E.00355
G1 X112.926 Y113.176 E.01672
G1 X112.846 Y113.096 E.00356
G1 X113.379 Y113.096 E.01672
G1 X113.46 Y113.176 E.00356
G1 X113.993 Y113.177 E.01672
G1 X113.912 Y113.096 E.00357
G1 X114.446 Y113.096 E.01672
G1 X114.526 Y113.177 E.00357
G1 X115.06 Y113.177 E.01672
G1 X114.979 Y113.096 E.00357
G1 X115.512 Y113.096 E.01672
G1 X115.593 Y113.177 E.00358
G1 X116.126 Y113.177 E.01672
G1 X116.046 Y113.096 E.00358
G1 X116.579 Y113.096 E.01672
G1 X116.66 Y113.177 E.00359
G1 X117.193 Y113.177 E.01672
G1 X117.112 Y113.096 E.00359
G1 X117.645 Y113.096 E.01672
G1 X117.727 Y113.177 E.00359
G1 X118.26 Y113.177 E.01672
G1 X118.179 Y113.096 E.0036
G1 X118.712 Y113.096 E.01672
G1 X118.793 Y113.177 E.0036
G1 X119.327 Y113.177 E.01672
G1 X119.245 Y113.096 E.0036
G1 X119.779 Y113.096 E.01672
G1 X119.86 Y113.178 E.00361
G1 X120.393 Y113.178 E.01672
G1 X120.312 Y113.096 E.00361
G1 X120.845 Y113.096 E.01672
G1 X120.927 Y113.178 E.00362
G1 X121.46 Y113.178 E.01672
G1 X121.379 Y113.096 E.00362
G1 X121.912 Y113.096 E.01672
G1 X121.994 Y113.178 E.00362
G1 X122.527 Y113.178 E.01672
G1 X122.445 Y113.096 E.00363
G1 X122.978 Y113.096 E.01672
G1 X123.06 Y113.178 E.00363
G1 X123.594 Y113.178 E.01672
G1 X123.512 Y113.096 E.00364
G1 X124.045 Y113.096 E.01672
G1 X124.127 Y113.178 E.00364
G1 X124.66 Y113.178 E.01672
G1 X124.578 Y113.096 E.00364
G1 X125.112 Y113.096 E.01672
G1 X125.194 Y113.178 E.00365
G1 X125.727 Y113.178 E.01672
G1 X125.645 Y113.096 E.00365
G1 X126.178 Y113.096 E.01672
G1 X126.741 Y113.659 E.02494
G1 E-5 F6000
G1 Z.7 F9000
G1 X132.104 Y113.689
G1 Z.2
G1 E5 F2400
G1 F1200
G1 X131.511 Y113.096 E.02628
G1 X130.978 Y113.096 E.01672
G1 X131.934 Y114.052 E.0424
G1 X131.934 Y114.586 E.01672
G1 X130.444 Y113.096 E.06605
G1 X129.911 Y113.096 E.01672
G1 X131.934 Y115.119 E.0897
G1 X131.934 Y115.652 E.01672
G1 X129.378 Y113.096 E.11335
G1 X128.845 Y113.096 E.01672
G1 X131.934 Y116.186 E.13699
G1 X131.934 Y116.719 E.01672
G1 X128.311 Y113.096 E.16064
G1 X127.778 Y113.096 E.01672
G1 X131.934 Y117.252 E.18429
G1 X131.934 Y117.785 E.01672
G1 X127.245 Y113.096 E.20794
G1 X126.711 Y113.096 E.01672
G1 X131.934 Y118.319 E.23158
G1 X131.934 Y118.852 E.01672
G1 X127.806 Y114.724 E.18305
G1 X127.929 Y115.182 E.01486
G1 X127.929 Y115.38 E.00621
G1 X131.934 Y119.385 E.17761
G1 X131.934 Y119.919 E.01672
G1 X127.929 Y115.913 E.17761
G1 X127.929 Y116.446 E.01672
G1 X131.934 Y120.452 E.17761
G1 X131.934 Y120.985 E.01672
G1 X127.929 Y116.98 E.17761
G1 X127.929 Y117.513 E.01672
G1 X131.934 Y121.518 E.17761
G1 X131.934 Y121.903 E.01207
G1 X131.786 Y121.903 E.00465
G1 X127.929 Y118.046 E.17104
G1 X127.929 Y118.58 E.01672
G1 X131.252 Y121.903 E.14739
G1 X130.719 Y121.903 E.01672
G1 X127.929 Y119.113 E.12373
G1 X127.929 Y119.646 E.01672
G1 X130.186 Y121.903 E.10008
G1 X129.652 Y121.903 E.01672
G1 X127.871 Y120.121 E.079
G1 X127.85 Y120.277 E.00493
G1 X127.719 Y120.504 E.00819
G1 X129.119 Y121.903 E.06205
G1 X128.585 Y121.903 E.01672
G1 X127.524 Y120.842 E.04706
G1 X127.329 Y121.18 E.01224
G1 X128.052 Y121.903 E.03206
G1 X127.519 Y121.903 E.01672
G1 X127.002 Y121.386 E.0229
G1 X126.664 Y121.582 E.01224
G1 X126.985 Y121.903 E.01424
G1 X126.452 Y121.902 E.01672
G1 X126.326 Y121.777 E.00558
G1 X126.26 Y121.815 E.00237
G1 X125.831 Y121.815 E.01347
G1 X125.918 Y121.902 E.00389
G1 X125.385 Y121.902 E.01672
G1 X125.298 Y121.815 E.00388
G1 X124.764 Y121.815 E.01672
G1 X124.852 Y121.902 E.00387
G1 X124.318 Y121.902 E.01672
G1 X124.231 Y121.815 E.00386
G1 X123.698 Y121.815 E.01672
G1 X123.785 Y121.902 E.00385
G1 X123.252 Y121.902 E.01672
G1 X123.165 Y121.815 E.00384
G1 X122.632 Y121.816 E.01672
G1 X122.718 Y121.902 E.00383
G1 X122.185 Y121.902 E.01672
G1 X122.099 Y121.816 E.00381
G1 X121.566 Y121.816 E.01672
G1 X121.651 Y121.902 E.0038
G1 X121.118 Y121.902 E.01672
G1 X121.032 Y121.816 E.00379
G1 X120.499 Y121.816 E.01672
G1 X120.585 Y121.901 E.00378
G1 X120.051 Y121.901 E.01672
G1 X119.966 Y121.816 E.00377
G1 X119.433 Y121.816 E.01672
G1 X119.518 Y121.901 E.00376
G1 X118.984 Y121.901 E.01672
G1 X118.9 Y121.817 E.00375
G1 X118.367 Y121.817 E.01672
G1 X118.451 Y121.901 E.00374
G1 X117.918 Y121.901 E.01672
G1 X117.834 Y121.817 E.00373
G1 X117.3 Y121.817 E.01672
G1 X117.384 Y121.901 E.00372
G1 X116.851 Y121.901 E.01672
G1 X116.767 Y121.817 E.00371
G1 X116.234 Y121.817 E.01672
G1 X116.318 Y121.901 E.0037
G1 X115.784 Y121.901 E.01672
G1 X115.701 Y121.817 E.00368
G1 X115.168 Y121.818 E.01672
G1 X115.251 Y121.9 E.00367
G1 X114.717 Y121.9 E.01672
G1 X114.635 Y121.818 E.00366
G1 X114.102 Y121.818 E.01672
G1 X114.184 Y121.9 E.00365
G1 X113.651 Y121.9 E.01672
G1 X113.568 Y121.818 E.00364
G1 X113.035 Y121.818 E.01672
G1 X113.117 Y121.9 E.00363
G1 X112.584 Y121.9 E.01672
G1 X112.502 Y121.818 E.00362
G1 X111.969 Y121.819 E.01672
G1 X112.05 Y121.9 E.00361
G1 X111.517 Y121.9 E.01672
G1 X111.436 Y121.819 E.0036
G1 X110.903 Y121.819 E.01672
G1 X110.984 Y121.9 E.00359
G1 X110.45 Y121.9 E.01672
G1 X110.37 Y121.819 E.00358
G1 X109.836 Y121.819 E.01672
G1 X109.917 Y121.9 E.00357
G1 X109.384 Y121.899 E.01672
G1 X109.303 Y121.819 E.00356
G1 X108.77 Y121.819 E.01672
G1 X108.85 Y121.899 E.00354
G1 X108.317 Y121.899 E.01672
G1 X108.237 Y121.82 E.00353
G1 X107.704 Y121.82 E.01672
G1 X107.783 Y121.899 E.00352
G1 X107.25 Y121.899 E.01672
G1 X107.171 Y121.82 E.00351
G1 X106.638 Y121.82 E.01672
G1 X106.717 Y121.899 E.0035
G1 X106.183 Y121.899 E.01672
G1 X106.104 Y121.82 E.00349
G1 X105.571 Y121.82 E.01672
G1 X105.65 Y121.899 E.00348
G1 X105.116 Y121.899 E.01672
G1 X105.038 Y121.82 E.00347
G1 X104.505 Y121.821 E.01672
G1 X104.583 Y121.899 E.00346
G1 X104.05 Y121.898 E.01672
G1 X103.972 Y121.821 E.00345
G1 X103.439 Y121.821 E.01672
G1 X103.686 Y122.068 E.01096
;LAYER_CHANGE
;Z:0.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;0.4


G1 E-3.5 F6000
;WIPE_START
G1 F7200
G1 X103.439 Y121.821 E-.27677
G1 X103.972 Y121.821 E-.42207
G1 X104.05 Y121.898 E-.08703
G1 X104.583 Y121.899 E-.42226
G1 X104.505 Y121.821 E-.0873
G1 X104.669 Y121.821 E-.12956
;WIPE_END
G1 E-.075 F6000
G1 Z.7 F9000
;AFTER_LAYER_CHANGE
;0.4
G1 X125.692 Y120.356
G1 X125.863 Y120.333
G1 X126.06 Y120.252
G1 X126.229 Y120.122
G1 X126.359 Y119.953
G1 X126.44 Y119.756
G1 X126.463 Y119.585
G1 X126.463 Y115.415
G1 X126.44 Y115.244
G1 X126.02 Y113.434
G1 Z.4
G1 E5 F2400
;TYPE:Perimeter
;WIDTH:0.45
G1 X125.774 Y113.402 E.00841
G1 X102.872 Y113.397 E.77519
G1 X102.873 Y112.873 E.01775
G1 X132.157 Y112.873 E.99124
G1 X132.157 Y122.127 E.31323
G1 X102.87 Y122.121 E.99135
G1 X102.87 Y121.602 E.01758
G1 X126.201 Y121.591 E.78973
G1 X127.15 Y121.043 E.03711
G1 X127.635 Y120.204 E.03279
G1 X127.705 Y119.666 E.01836
G1 X127.705 Y115.211 E.15081
G1 X127.52 Y114.519 E.02424
G1 X127.039 Y113.893 E.02672
G1 X126.311 Y113.472 E.02846
G1 X126.08 Y113.442 E.00791
G1 X126.042 Y113.848 F9000
G1 F2400
G1 X125.747 Y113.809 E.01009
G1 X102.464 Y113.804 E.78809
G1 X102.466 Y112.466 E.04531
G1 X132.564 Y112.466 E1.01877
G1 X132.564 Y122.534 E.34079
G1 X102.463 Y122.528 E1.01891
G1 X102.463 Y121.195 E.04513
G1 X126.092 Y121.184 E.79982
G1 X126.852 Y120.745 E.02973
G1 X127.242 Y120.071 E.02636
G1 X127.298 Y119.64 E.01471
G1 X127.298 Y115.265 E.1481
G1 X127.148 Y114.703 E.01969
G1 X126.766 Y114.205 E.02124
G1 X126.178 Y113.866 E.02298
G1 X126.102 Y113.856 E.00259
G1 X126.062 Y114.269 F9000
G1 F2400
G1 X125.72 Y114.216 E.01171
G1 X102.057 Y114.211 E.80098
G1 X102.06 Y112.059 E.07286
G1 X132.971 Y112.059 E1.04631
G1 X132.971 Y122.941 E.36835
G1 X102.055 Y122.935 E1.04647
G1 X102.055 Y120.788 E.07268
G1 X125.982 Y120.777 E.8099
G1 X126.554 Y120.447 E.02235
G1 X126.849 Y119.937 E.01993
G1 X126.891 Y119.613 E.01107
G1 X126.891 Y115.318 E.14538
G1 X126.775 Y114.886 E.01513
G1 X126.492 Y114.517 E.01576
G1 X126.114 Y114.299 E.01477
G1 X126.065 Y114.74 F9000
G1 F2400
G1 X125.911 Y114.652 E.00601
G1 X125.694 Y114.623 E.00742
G1 X101.649 Y114.618 E.81388
G1 X101.654 Y111.652 E.10042
G1 X133.378 Y111.652 E1.07385
G1 X133.378 Y123.348 E.39591
G1 X101.648 Y123.342 E1.07402
G1 X101.648 Y120.381 E.10023
G1 X125.873 Y120.37 E.81998
G1 X126.256 Y120.149 E.01496
G1 X126.455 Y119.804 E.01349
G1 X126.484 Y119.586 E.00743
G1 X126.484 Y115.372 E.14266
G1 X126.403 Y115.07 E.01058
G1 X126.218 Y114.829 E.01028
G1 X126.117 Y114.77 E.00397
G1 X126.031 Y115.254 F9000
;TYPE:External perimeter
G1 F1500
G1 X125.945 Y115.141 E.0048
G1 X125.778 Y115.045 E.00653
G1 X125.667 Y115.03 E.00378
G1 X101.245 Y115.025 E.82664
G1 X101.247 Y111.245 E.12797
G1 X133.785 Y111.245 E1.10139
G1 X133.785 Y123.755 E.42347
G1 X101.241 Y123.75 E1.10158
G1 X101.245 Y119.975 E.12778
G1 X125.764 Y119.963 E.82993
G1 X125.958 Y119.851 E.00758
G1 X126.062 Y119.671 E.00706
G1 X126.077 Y119.56 E.00378
G1 X126.077 Y115.425 E.13994
G1 X126.047 Y115.311 E.00399
G1 X126.112 Y115.137 F9000
G1 X127.082 Y113.682
;TYPE:Solid infill
;WIDTH:0.456296
G1 F2400
G1 X127.504 Y113.26 E.02054
G1 X128.089 Y113.26 E.02009
G1 X127.496 Y113.853 E.02882
G1 X127.75 Y114.183 E.01433
G1 X128.673 Y113.26 E.0449
G1 X129.258 Y113.26 E.02009
G1 X127.937 Y114.581 E.06422
G1 X128.06 Y115.042 E.01641
G1 X129.843 Y113.26 E.08663
G1 X130.427 Y113.26 E.02009
G1 X128.092 Y115.595 E.11351
G1 X128.092 Y116.179 E.02009
G1 X131.012 Y113.26 E.14193
G1 X131.596 Y113.26 E.02009
G1 X128.092 Y116.764 E.17035
G1 X128.092 Y117.349 E.02009
G1 X131.77 Y113.67 E.17881
G1 X131.77 Y114.255 E.02009
G1 X128.092 Y117.933 E.17881
G1 X128.092 Y118.518 E.02009
G1 X131.77 Y114.839 E.17881
G1 X131.77 Y115.424 E.02009
G1 X128.092 Y119.102 E.17881
G1 X128.092 Y119.687 E.02009
G1 X131.77 Y116.009 E.17881
G1 X131.77 Y116.593 E.02009
G1 X127.974 Y120.39 E.18455
G1 X127.433 Y121.326 E.03717
G1 X126.969 Y121.594 E.01841
G1 X126.989 Y121.739 E.00503
G1 X127.209 Y121.739 E.00758
G1 X131.77 Y117.178 E.22172
G1 X131.77 Y117.762 E.02009
G1 X127.794 Y121.739 E.19331
G1 X128.378 Y121.739 E.02009
G1 X131.77 Y118.347 E.1649
G1 X131.77 Y118.932 E.02009
G1 X128.963 Y121.739 E.13648
G1 X129.547 Y121.74 E.02009
G1 X131.77 Y119.516 E.10807
G1 X131.77 Y120.101 E.02009
G1 X130.132 Y121.74 E.07966
G1 X130.716 Y121.74 E.02009
G1 X131.77 Y120.685 E.05125
G1 X131.77 Y121.27 E.02009
G1 X131.118 Y121.923 E.03174
G1 E-5 F6000
G1 Z.9 F9000
G1 X126.608 Y121.811
G1 Z.4
G1 E5 F2400
;TYPE:Gap fill
;WIDTH:0.179427
G1 F1800
G1 X126.255 Y121.858 E.00404
;WIDTH:0.170277
G1 X103.073 Y121.862 E.24549
G1 E-3.5 F6000
;WIPE_START
G1 F7200
G1 X104.873 Y121.862 E-1.425
;WIPE_END
G1 E-.075 F6000
G1 Z.9 F9000
G1 X133.4 Y123.37
G1 X133.4 Y111.63
G1 X103.076 Y113.135
G1 Z.4
G1 E5 F2400
;WIDTH:0.16462
G1 F1800
G1 X125.787 Y113.137 E.22982
;WIDTH:0.165144
G1 X125.795 Y113.138 E.00008
;WIDTH:0.204207
G1 X126.093 Y113.157 E.004
;WIDTH:0.24327
G1 X126.391 Y113.177 E.00497
;WIDTH:0.256737
G1 X126.431 Y113.183 E.00073
;WIDTH:0.282597
G1 X126.595 Y113.227 E.00338
M106 S249.9
;LAYER_CHANGE
;Z:0.6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;0.6


G1 E-3.5 F6000
;WIPE_START
G1 F7200
G1 X126.431 Y113.183 E-.13442
;WIPE_END
G1 E-1.36558 F6000
G1 Z.9 F9000
;AFTER_LAYER_CHANGE
;0.6
G1 X127.705 Y119.525
G1 Z.6
G1 E5 F2400
;TYPE:Perimeter
;WIDTH:0.45
G1 X127.705 Y115.211 E.14602
G1 X127.52 Y114.519 E.02424
G1 X127.115 Y113.992 E.0225
G1 X126.588 Y113.587 E.0225
G1 X125.896 Y113.402 E.02424
G1 X102.989 Y113.397 E.77539
G1 X102.99 Y112.988 E.01382
G1 X132.157 Y112.988 E.98729
G1 X132.157 Y122.011 E.30541
G1 X102.985 Y122.004 E.98744
G1 X102.985 Y121.603 E.01357
G1 X126.17 Y121.591 E.78479
G1 X126.944 Y121.176 E.02974
G1 X127.502 Y120.548 E.02841
G1 X127.705 Y119.789 E.0266
G1 X127.705 Y119.585 E.0069
G1 X127.298 Y119.625 F9000
G1 F2400
G1 X127.298 Y115.265 E.1476
G1 X127.148 Y114.703 E.01969
G1 X126.825 Y114.282 E.01795
G1 X126.404 Y113.959 E.01795
G1 X125.843 Y113.809 E.01968
G1 X102.581 Y113.804 E.78738
G1 X102.584 Y112.581 E.04138
G1 X132.564 Y112.581 E1.01481
G1 X132.564 Y122.418 E.33297
G1 X102.578 Y122.411 E1.015
G1 X102.578 Y121.196 E.04112
G1 X126.068 Y121.184 E.7951
G1 X126.688 Y120.851 E.02383
G1 X127.134 Y120.35 E.0227
G1 X127.298 Y119.685 E.02318
G1 X126.88 Y119.724 F9000
G1 F2400
G1 X126.891 Y115.318 E.14913
G1 X126.775 Y114.886 E.01513
G1 X126.535 Y114.572 E.01339
G1 X126.221 Y114.332 E.01339
G1 X125.789 Y114.216 E.01513
G1 X102.173 Y114.211 E.79938
G1 X102.177 Y112.174 E.06893
G1 X132.971 Y112.174 E1.04234
G1 X132.971 Y122.825 E.36053
G1 X102.171 Y122.818 E1.04256
G1 X102.171 Y120.789 E.06867
G1 X125.965 Y120.777 E.80541
G1 X126.432 Y120.527 E.01792
G1 X126.765 Y120.151 E.017
G1 X126.864 Y119.782 E.01295
G1 X126.433 Y119.819 F9000
G1 F2400
G1 X126.484 Y119.628 E.00668
G1 X126.484 Y115.372 E.14407
G1 X126.403 Y115.07 E.01058
G1 X126.244 Y114.863 E.00884
G1 X126.037 Y114.704 E.00884
G1 X125.735 Y114.623 E.01057
G1 X101.765 Y114.618 E.81137
G1 X101.771 Y111.767 E.09649
G1 X133.378 Y111.767 E1.06987
G1 X133.378 Y123.233 E.38809
G1 X101.764 Y123.225 E1.07012
G1 X101.764 Y120.382 E.09621
G1 X125.863 Y120.37 E.81572
G1 X126.176 Y120.202 E.01201
G1 X126.397 Y119.953 E.01129
G1 X126.417 Y119.877 E.00267
G1 X125.919 Y119.878 F9000
;TYPE:External perimeter
G1 F1500
G1 X126.029 Y119.755 E.00558
G1 X126.077 Y119.575 E.00631
G1 X126.077 Y115.425 E.14045
G1 X126.031 Y115.254 E.00602
G1 X125.954 Y115.153 E.00428
G1 X125.854 Y115.076 E.00428
G1 X125.682 Y115.03 E.00602
G1 X101.369 Y115.025 E.82294
G1 X101.357 Y115.011 E.00062
G1 X101.365 Y111.36 E.1236
G1 X133.785 Y111.36 E1.0974
G1 X133.785 Y123.64 E.41566
G1 X101.357 Y123.632 E1.09767
G1 X101.357 Y119.989 E.12331
G1 X101.37 Y119.975 E.00063
G1 X125.76 Y119.963 E.8256
G1 X125.866 Y119.906 E.00407
G1 X126.065 Y119.954 F9000
G1 E-5 F6000
G1 Z1.1 F9000
G1 X127.522 Y121.806
G1 Z.6
G1 E5 F2400
;TYPE:Solid infill
;WIDTH:0.454183
G1 X127.194 Y121.478 E.0159
G1 X127.467 Y121.17 E.01409
G1 X127.921 Y121.623 E.02194
G1 X128.503 Y121.623 E.01989
G1 X127.741 Y120.862 E.03685
G1 X127.852 Y120.737 E.00571
G1 X127.925 Y120.464 E.00965
G1 X129.084 Y121.624 E.05608
G1 X129.666 Y121.624 E.01989
G1 X128.048 Y120.005 E.07827
G1 X128.092 Y119.84 E.00586
G1 X128.092 Y119.468 E.01272
G1 X130.248 Y121.624 E.10426
G1 X130.83 Y121.624 E.01989
G1 X128.092 Y118.886 E.1324
G1 X128.092 Y118.305 E.01989
G1 X131.412 Y121.624 E.16053
G1 X131.77 Y121.624 E.01227
G1 X131.77 Y121.402 E.00762
G1 X128.092 Y117.723 E.17789
G1 X128.092 Y117.142 E.01989
G1 X131.77 Y120.82 E.17789
G1 X131.77 Y120.238 E.01989
G1 X128.092 Y116.56 E.17789
G1 X128.092 Y115.978 E.01989
G1 X131.77 Y119.657 E.17789
G1 X131.77 Y119.075 E.01989
G1 X128.092 Y115.397 E.17789
G1 X128.092 Y115.16 E.00809
G1 X127.966 Y114.689 E.01669
G1 X131.77 Y118.493 E.184
G1 X131.77 Y117.912 E.01989
G1 X127.345 Y113.486 E.21402
G1 X127.3 Y113.375 E.00411
G1 X127.815 Y113.375 E.01764
G1 X131.77 Y117.33 E.19127
G1 X131.77 Y116.749 E.01989
G1 X128.397 Y113.375 E.16315
G1 X128.979 Y113.375 E.01989
G1 X131.77 Y116.167 E.13502
G1 X131.77 Y115.585 E.01989
G1 X129.56 Y113.375 E.10689
G1 X130.142 Y113.375 E.01989
G1 X131.77 Y115.004 E.07876
G1 X131.77 Y114.422 E.01989
G1 X130.723 Y113.375 E.05064
G1 X131.305 Y113.375 E.01989
G1 X131.954 Y114.024 E.03137
G1 E-5 F6000
G1 Z1.1 F9000
G1 X126.773 Y113.45
G1 Z.6
G1 E5 F2400
;TYPE:Gap fill
;WIDTH:0.229026
G1 F1800
G1 X126.743 Y113.374 E.00126
;WIDTH:0.256833
G1 X126.712 Y113.299 E.00145
;WIDTH:0.256832
G1 X126.707 Y113.298 E.00008
;WIDTH:0.255511
G1 X126.55 Y113.278 E.0028
;WIDTH:0.215863
G1 X126.393 Y113.257 E.00228
;WIDTH:0.176215
G1 X126.235 Y113.236 E.00176
;WIDTH:0.136568
G1 X126.078 Y113.215 E.00124
;LAYER_CHANGE
;Z:0.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;0.8


G1 E-3.5 F6000
;WIPE_START
G1 F7200
G1 X126.235 Y113.236 E-.12559
;WIPE_END
G1 E-1.37441 F6000
G1 Z1.1 F9000
;AFTER_LAYER_CHANGE
;0.8
G1 X127.705 Y119.678
G1 Z.8
G1 E5 F2400
;TYPE:Perimeter
;WIDTH:0.45
G1 X127.705 Y115.334 E.14706
G1 X127.635 Y114.796 E.01835
G1 X127.15 Y113.957 E.03279
G1 X126.311 Y113.472 E.0328
G1 X125.774 Y113.402 E.01835
G1 X103.106 Y113.396 E.76728
G1 X103.107 Y113.104 E.0099
G1 X132.157 Y113.104 E.98333
G1 X132.157 Y121.895 E.29759
G1 X103.101 Y121.885 E.98353
G1 X103.101 Y121.603 E.00954
G1 X126.073 Y121.591 E.77758
G1 X126.802 Y121.289 E.02671
G1 X127.487 Y120.604 E.0328
G1 X127.705 Y119.738 E.03024
G1 X127.294 Y119.752 F9000
G1 F2400
G1 X127.298 Y115.36 E.14866
G1 X127.242 Y114.929 E.01471
G1 X126.852 Y114.255 E.02636
G1 X126.178 Y113.865 E.02636
G1 X125.747 Y113.809 E.01471
G1 X102.697 Y113.803 E.7802
G1 X102.701 Y112.697 E.03745
G1 X132.564 Y112.697 E1.01084
G1 X132.564 Y122.303 E.32515
G1 X102.693 Y122.292 E1.01109
G1 X102.693 Y121.196 E.03709
G1 X125.992 Y121.184 E.78862
G1 X126.571 Y120.944 E.02123
G1 X127.122 Y120.394 E.02636
G1 X127.278 Y119.81 E.02045
G1 X126.854 Y119.822 F9000
G1 F2400
G1 X126.891 Y119.682 E.00493
G1 X126.891 Y115.387 E.14538
G1 X126.849 Y115.063 E.01107
G1 X126.554 Y114.553 E.01992
G1 X126.044 Y114.258 E.01993
G1 X125.72 Y114.216 E.01107
G1 X102.289 Y114.21 E.79312
G1 X102.295 Y112.29 E.06501
G1 X132.971 Y112.29 E1.03836
G1 X132.971 Y122.71 E.35271
G1 X102.286 Y122.699 E1.03865
G1 X102.286 Y120.79 E.06464
G1 X125.911 Y120.777 E.79965
G1 X126.341 Y120.599 E.01575
G1 X126.757 Y120.183 E.01993
G1 X126.838 Y119.88 E.0106
G1 X126.413 Y119.893 F9000
G1 F2400
G1 X126.484 Y119.628 E.00927
G1 X126.484 Y115.414 E.14266
G1 X126.455 Y115.196 E.00742
G1 X126.256 Y114.851 E.01349
G1 X125.911 Y114.652 E.0135
G1 X125.694 Y114.623 E.00742
G1 X101.881 Y114.617 E.80604
G1 X101.889 Y111.883 E.09256
G1 X133.378 Y111.883 E1.06587
G1 X133.378 Y123.117 E.38027
G1 X101.879 Y123.106 E1.06621
G1 X101.879 Y120.383 E.09218
G1 X125.83 Y120.37 E.81069
G1 X126.11 Y120.254 E.01027
G1 X126.398 Y119.951 E.01415
G1 X125.879 Y119.909 F9000
;TYPE:External perimeter
G1 F1500
G1 X126.027 Y119.761 E.00706
G1 X126.077 Y119.575 E.00655
G1 X126.077 Y115.44 E.13994
G1 X126.062 Y115.33 E.00378
G1 X125.958 Y115.149 E.00706
G1 X125.778 Y115.045 E.00706
G1 X125.667 Y115.03 E.00378
G1 X101.48 Y115.024 E.81869
G1 X101.483 Y111.476 E.12012
G1 X133.785 Y111.476 E1.09339
G1 X133.785 Y123.524 E.40784
G1 X101.472 Y123.513 E1.09377
G1 X101.481 Y119.976 E.11973
G1 X125.749 Y119.963 E.82144
G1 X125.824 Y119.932 E.00276
G1 X126.06 Y120.013 F9000
G1 E-5 F6000
G1 Z1.3 F9000
G1 X131.111 Y121.692
G1 Z.8
G1 E5 F2400
;TYPE:Solid infill
;WIDTH:0.45925
G1 X131.77 Y121.033 E.03226
G1 X131.77 Y120.444 E.02038
G1 X130.706 Y121.508 E.05211
G1 X130.117 Y121.508 E.02038
G1 X131.77 Y119.855 E.08093
G1 X131.77 Y119.266 E.02038
G1 X129.529 Y121.508 E.10974
G1 X128.94 Y121.508 E.02038
G1 X131.77 Y118.677 E.13856
G1 X131.77 Y118.089 E.02038
G1 X128.352 Y121.507 E.16737
G1 X127.763 Y121.507 E.02038
G1 X131.77 Y117.5 E.19619
G1 X131.77 Y116.911 E.02038
G1 X127.175 Y121.507 E.225
G1 X127.131 Y121.507 E.0015
G1 X127.834 Y120.805 E.03439
G1 X128.033 Y120.06 E.0267
G1 X131.77 Y116.322 E.18296
G1 X131.77 Y115.734 E.02038
G1 X128.092 Y119.412 E.18008
G1 X128.092 Y118.823 E.02038
G1 X131.77 Y115.145 E.18008
G1 X131.77 Y114.556 E.02038
G1 X128.092 Y118.234 E.18008
G1 X128.092 Y117.646 E.02038
G1 X131.77 Y113.967 E.18008
G1 X131.77 Y113.491 E.0165
G1 X131.658 Y113.491 E.00388
G1 X128.092 Y117.057 E.17459
G1 X128.092 Y116.468 E.02038
G1 X131.069 Y113.491 E.14576
G1 X130.481 Y113.491 E.02038
G1 X128.092 Y115.879 E.11694
G1 X128.09 Y115.292 E.02031
G1 X129.892 Y113.491 E.08822
G1 X129.303 Y113.491 E.02038
G1 X128.022 Y114.772 E.06274
G1 X128.008 Y114.669 E.0036
G1 X127.835 Y114.37 E.01197
G1 X128.714 Y113.491 E.04304
G1 X128.126 Y113.491 E.02038
G1 X127.62 Y113.997 E.02477
G1 X127.433 Y113.674 E.0129
G1 X127.383 Y113.645 E.00202
G1 X127.72 Y113.307 E.01651
M106 S252.45
;LAYER_CHANGE
;Z:1
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;1


G1 E-3.5 F6000
;WIPE_START
G1 F7200
G1 X127.383 Y113.645 E-.37754
G1 X127.433 Y113.674 E-.04629
G1 X127.62 Y113.997 E-.29494
G1 X128.126 Y113.491 E-.56642
G1 X128.302 Y113.491 E-.13981
;WIPE_END
G1 E-.075 F6000
G1 Z1.3 F9000
;AFTER_LAYER_CHANGE
;1
G1 X127.705 Y119.229
G1 Z1
G1 E5 F2400
;TYPE:Perimeter
;WIDTH:0.45
G1 X127.705 Y115.211 E.13601
G1 X127.52 Y114.519 E.02424
G1 X127.039 Y113.893 E.02672
G1 X126.311 Y113.472 E.02846
G1 X125.774 Y113.402 E.01835
G1 X103.216 Y113.396 E.76355
G1 X103.216 Y113.219 E.00597
G1 X132.157 Y113.219 E.97962
G1 X132.157 Y121.781 E.28979
G1 X103.216 Y121.781 E.97962
G1 X103.216 Y121.604 E.00599
G1 X126.201 Y121.591 E.77801
G1 X127.039 Y121.107 E.03277
G1 X127.52 Y120.481 E.02672
G1 X127.705 Y119.789 E.02424
G1 X127.705 Y119.289 E.01692
G1 X127.298 Y119.36 F9000
G1 F2400
G1 X127.298 Y115.265 E.13862
G1 X127.148 Y114.703 E.01969
G1 X126.766 Y114.205 E.02124
G1 X126.178 Y113.866 E.02298
G1 X125.747 Y113.809 E.01471
G1 X102.809 Y113.803 E.77643
G1 X102.809 Y112.812 E.03352
G1 X132.564 Y112.812 E1.00718
G1 X132.564 Y122.188 E.31735
G1 X102.809 Y122.188 E1.00718
G1 X102.809 Y121.197 E.03354
G1 X126.092 Y121.184 E.78809
G1 X126.766 Y120.795 E.02634
G1 X127.148 Y120.297 E.02124
G1 X127.298 Y119.735 E.01969
G1 X127.298 Y119.42 E.01068
G1 X126.891 Y119.491 F9000
G1 F2400
G1 X126.891 Y115.318 E.14124
G1 X126.775 Y114.886 E.01513
G1 X126.492 Y114.517 E.01576
G1 X126.044 Y114.259 E.0175
G1 X125.72 Y114.216 E.01106
G1 X102.402 Y114.21 E.7893
G1 X102.402 Y112.405 E.06108
G1 X132.971 Y112.405 E1.03474
G1 X132.971 Y122.595 E.34491
G1 X102.402 Y122.595 E1.03474
G1 X102.402 Y120.79 E.06109
G1 X125.983 Y120.777 E.79818
G1 X126.492 Y120.483 E.01992
G1 X126.775 Y120.114 E.01576
G1 X126.891 Y119.682 E.01513
G1 X126.891 Y119.551 E.00444
G1 X126.484 Y119.622 F9000
G1 F2400
G1 X126.484 Y115.372 E.14385
G1 X126.403 Y115.07 E.01058
G1 X126.218 Y114.829 E.01028
G1 X125.911 Y114.652 E.01202
G1 X125.694 Y114.623 E.00742
G1 X101.995 Y114.617 E.80217
G1 X101.995 Y111.998 E.08863
G1 X133.378 Y111.998 E1.0623
G1 X133.378 Y123.002 E.37247
G1 X101.995 Y123.002 E1.0623
G1 X101.995 Y120.383 E.08864
G1 X125.873 Y120.37 E.80826
G1 X126.218 Y120.171 E.01349
G1 X126.403 Y119.93 E.01028
G1 X126.47 Y119.68 E.00877
G1 X126.031 Y119.746 F9000
;TYPE:External perimeter
G1 F1500
G1 X126.077 Y119.575 E.00602
G1 X126.077 Y115.425 E.14045
G1 X126.031 Y115.254 E.00602
G1 X125.945 Y115.141 E.0048
G1 X125.778 Y115.045 E.00653
G1 X125.667 Y115.03 E.00378
G1 X101.59 Y115.024 E.81496
G1 X101.588 Y111.591 E.11619
G1 X133.785 Y111.591 E1.08986
G1 X133.785 Y123.409 E.40002
G1 X101.588 Y123.409 E1.08986
G1 X101.591 Y119.976 E.11619
G1 X125.764 Y119.963 E.81823
G1 X125.945 Y119.859 E.00706
G1 X125.994 Y119.794 E.00277
G1 X126.209 Y119.737 F9000
G1 E-5 F6000
G1 Z1.5 F9000
G1 X127.925 Y121.577
G1 Z1
G1 E5 F2400
;TYPE:Solid infill
;WIDTH:0.46453
G1 X127.496 Y121.148 E.0213
G1 X127.755 Y120.81 E.01491
G1 X128.339 Y121.394 E.02894
G1 X128.935 Y121.394 E.0209
G1 X127.942 Y120.401 E.04923
G1 X128.068 Y119.931 E.01707
G1 X129.531 Y121.394 E.07255
G1 X130.127 Y121.394 E.0209
G1 X128.092 Y119.359 E.1009
G1 X128.092 Y118.763 E.0209
G1 X130.724 Y121.394 E.13046
G1 X131.32 Y121.394 E.0209
G1 X128.092 Y118.166 E.16002
G1 X128.092 Y117.57 E.0209
G1 X131.77 Y121.248 E.18237
G1 X131.77 Y120.652 E.0209
G1 X128.092 Y116.974 E.18237
G1 X128.092 Y116.378 E.0209
G1 X131.77 Y120.056 E.18237
G1 X131.77 Y119.46 E.0209
G1 X128.092 Y115.781 E.18237
G1 X128.092 Y115.185 E.0209
G1 X131.77 Y118.863 E.18237
G1 X131.77 Y118.267 E.0209
G1 X127.883 Y114.38 E.19273
G1 X127.874 Y114.345 E.00126
G1 X127.307 Y113.606 E.03265
G1 X127.706 Y113.606 E.01398
G1 X131.77 Y117.671 E.20153
G1 X131.77 Y117.075 E.0209
G1 X128.302 Y113.606 E.17197
G1 X128.898 Y113.606 E.0209
G1 X131.77 Y116.478 E.14241
G1 X131.77 Y115.882 E.0209
G1 X129.494 Y113.606 E.11284
G1 X130.091 Y113.606 E.0209
G1 X131.77 Y115.286 E.08328
G1 X131.77 Y114.69 E.0209
G1 X130.687 Y113.606 E.05372
G1 X131.283 Y113.606 E.0209
G1 X131.954 Y114.277 E.03324
;LAYER_CHANGE
;Z:1.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;1.2


G1 E-3.5 F6000
;WIPE_START
G1 F7200
G1 X131.283 Y113.606 E-.75074
G1 X130.687 Y113.606 E-.47203
G1 X130.867 Y113.787 E-.20224
;WIPE_END
G1 E-.075 F6000
G1 Z1.5 F9000
;AFTER_LAYER_CHANGE
;1.2
G1 X127.566 Y120.308
G1 Z1.2
G1 E5 F2400
;TYPE:Perimeter
;WIDTH:0.45
G1 X127.705 Y119.789 E.01817
G1 X127.705 Y115.334 E.15081
G1 X127.635 Y114.796 E.01836
G1 X127.15 Y113.957 E.03279
G1 X126.311 Y113.472 E.03279
G1 X125.774 Y113.402 E.01835
G1 X103.331 Y113.395 E.75964
G1 X103.331 Y113.335 E.00205
G1 X132.157 Y113.335 E.97571
G1 X132.157 Y121.665 E.28197
G1 X103.331 Y121.665 E.97571
G1 X103.331 Y121.604 E.00207
G1 X126.073 Y121.591 E.76977
G1 X126.802 Y121.289 E.02671
G1 X127.487 Y120.604 E.03279
G1 X127.551 Y120.365 E.00837
G1 X127.168 Y120.221 F9000
G1 F2400
G1 X127.298 Y119.735 E.01703
G1 X127.298 Y115.36 E.14809
G1 X127.242 Y114.929 E.01471
G1 X126.852 Y114.255 E.02636
G1 X126.178 Y113.865 E.02636
G1 X125.747 Y113.809 E.01471
G1 X102.924 Y113.802 E.77252
G1 X102.924 Y112.928 E.0296
G1 X132.564 Y112.928 E1.00327
G1 X132.564 Y122.072 E.30953
G1 X102.924 Y122.072 E1.00327
G1 X102.924 Y121.197 E.02962
G1 X125.992 Y121.184 E.78081
G1 X126.571 Y120.944 E.02123
G1 X127.122 Y120.394 E.02636
G1 X127.153 Y120.279 E.00401
G1 X126.77 Y120.135 F9000
G1 F2400
G1 X126.891 Y119.682 E.01589
G1 X126.891 Y115.387 E.14538
G1 X126.849 Y115.063 E.01107
G1 X126.554 Y114.553 E.01993
G1 X126.044 Y114.259 E.01993
G1 X125.72 Y114.216 E.01106
G1 X102.517 Y114.209 E.78539
G1 X102.517 Y112.521 E.05716
G1 X132.971 Y112.521 E1.03083
G1 X132.971 Y122.479 E.33709
G1 X102.517 Y122.479 E1.03083
G1 X102.517 Y120.79 E.05717
G1 X125.911 Y120.777 E.79184
G1 X126.341 Y120.599 E.01575
G1 X126.749 Y120.19 E.01957
G1 X126.336 Y120.028 F9000
G1 F2400
G1 X126.392 Y119.972 E.00269
G1 X126.484 Y119.628 E.01205
G1 X126.484 Y115.414 E.14266
G1 X126.455 Y115.196 E.00743
G1 X126.256 Y114.851 E.01349
G1 X125.911 Y114.652 E.01349
G1 X125.694 Y114.623 E.00742
G1 X102.11 Y114.616 E.79827
G1 X102.11 Y112.114 E.08471
G1 X133.378 Y112.114 E1.05839
G1 X133.378 Y122.886 E.36465
G1 X102.11 Y122.886 E1.05839
G1 X102.11 Y120.384 E.08472
G1 X125.83 Y120.37 E.80287
G1 X126.11 Y120.254 E.01027
G1 X126.293 Y120.071 E.00877
G1 X125.879 Y119.909 F9000
;TYPE:External perimeter
G1 F1500
G1 X126.027 Y119.761 E.00706
G1 X126.077 Y119.575 E.00655
G1 X126.077 Y115.44 E.13994
G1 X126.062 Y115.329 E.00378
G1 X125.958 Y115.149 E.00706
G1 X125.778 Y115.045 E.00706
G1 X125.667 Y115.03 E.00378
G1 X101.703 Y115.023 E.81114
G1 X101.703 Y111.706 E.11227
G1 X133.785 Y111.706 E1.08595
G1 X133.785 Y123.294 E.39221
G1 X101.703 Y123.294 E1.08595
G1 X101.704 Y119.977 E.11227
G1 X125.749 Y119.963 E.81389
G1 X125.824 Y119.932 E.00276
G1 X126.06 Y120.013 F9000
G1 E-5 F6000
G1 Z1.7 F9000
G1 X127.757 Y120.912
G1 Z1.2
G1 E5 F2400
;TYPE:Solid infill
;WIDTH:0.494207
G1 X127.391 Y121.278 E.01944
G1 X128.029 Y121.278 E.02395
G1 X128.212 Y121.095 E.00971
G1 X128.85 Y121.095 E.02395
G1 X128.667 Y121.278 E.00971
G1 X129.305 Y121.278 E.02395
G1 X129.489 Y121.095 E.00971
G1 X130.127 Y121.095 E.02395
G1 X129.944 Y121.278 E.00971
G1 X130.582 Y121.278 E.02395
G1 X130.765 Y121.095 E.00971
G1 X131.403 Y121.095 E.02395
G1 X131.037 Y121.462 E.01944
G1 E-5 F6000
G1 Z1.7 F9000
G1 X128.797 Y120.688
G1 Z1.2
G1 E5 F2400
;TYPE:Internal infill
;WIDTH:0.45
G1 F3000
G1 X128.062 Y119.953 E.03519
G1 X127.873 Y120.656 E.02463
G1 X131.77 Y119.612 E.13657
G1 X131.77 Y120.688 E.03643
G1 X130.939 Y120.688 E.02814
G1 X131.77 Y117.586 E.10873
G1 X131.77 Y116.754 E.02816
G1 X129.328 Y114.312 E.1169
G1 X131.77 Y114.312 E.08266
G1 X131.77 Y114.555 E.00823
G1 X128.092 Y115.54 E.1289
G1 X128.092 Y117.983 E.08267
G1 E-5 F6000
G1 Z1.7 F9000
G1 X128.067 Y113.538
G1 Z1.2
G1 E5 F2400
;TYPE:Solid infill
;WIDTH:0.45815
G1 X127.701 Y113.905 E.01788
G1 X128.288 Y113.905 E.02027
G1 X128.471 Y113.722 E.00894
G1 X129.059 Y113.722 E.02027
G1 X128.876 Y113.905 E.00894
G1 X129.463 Y113.905 E.02027
G1 X129.646 Y113.722 E.00894
G1 X130.233 Y113.722 E.02027
G1 X130.05 Y113.905 E.00894
G1 X130.637 Y113.905 E.02027
G1 X130.82 Y113.722 E.00894
G1 X131.408 Y113.722 E.02027
G1 X131.041 Y114.088 E.01788
;LAYER_CHANGE
;Z:1.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;1.4


G1 E-3.5 F6000
;WIPE_START
G1 F7200
G1 X131.408 Y113.722 E-.41003
G1 X130.82 Y113.722 E-.46489
G1 X130.637 Y113.905 E-.20494
G1 X130.201 Y113.905 E-.34514
;WIPE_END
G1 E-.075 F6000
G1 Z1.7 F9000
;AFTER_LAYER_CHANGE
;1.4
G1 X127.623 Y120.095
G1 Z1.4
G1 E5 F2400
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X127.705 Y119.789 E.01073
G1 X127.705 Y115.211 E.15496
G1 X127.52 Y114.519 E.02424
G1 X127.039 Y113.893 E.02672
G1 X126.311 Y113.472 E.02846
G1 X126.143 Y113.45 E.00575
G1 X132.157 Y113.45 E.20358
G1 X132.157 Y121.55 E.27416
G1 X126.247 Y121.55 E.20006
G1 X126.942 Y121.177 E.02671
G1 X127.502 Y120.549 E.02846
G1 X127.608 Y120.153 E.01388
G1 X127.214 Y120.05 F9000
G1 F2400
G1 X127.298 Y119.735 E.01103
G1 X127.298 Y115.265 E.15133
G1 X127.148 Y114.703 E.01969
G1 X126.766 Y114.205 E.02124
G1 X126.178 Y113.865 E.02298
G1 X125.747 Y113.809 E.01471
G1 X103.04 Y113.802 E.76861
G1 X103.04 Y113.043 E.0257
G1 X132.564 Y113.043 E.99936
G1 X132.564 Y121.957 E.30171
G1 X103.04 Y121.957 E.99936
G1 X103.04 Y121.197 E.02571
G1 X126.067 Y121.184 E.77944
G1 X126.686 Y120.852 E.02378
G1 X127.133 Y120.351 E.02274
G1 X127.198 Y120.108 E.00851
G1 X126.805 Y120.005 F9000
G1 F2400
G1 X126.891 Y119.682 E.01132
G1 X126.891 Y115.318 E.1477
G1 X126.775 Y114.886 E.01513
G1 X126.492 Y114.517 E.01576
G1 X126.044 Y114.259 E.0175
G1 X125.72 Y114.216 E.01106
G1 X102.633 Y114.209 E.78148
G1 X102.633 Y112.636 E.05325
G1 X132.971 Y112.636 E1.02692
G1 X132.971 Y122.364 E.32927
G1 X102.633 Y122.364 E1.02692
G1 X102.633 Y120.79 E.05326
G1 X125.965 Y120.777 E.78976
G1 X126.431 Y120.528 E.01788
G1 X126.765 Y120.152 E.01703
G1 X126.789 Y120.063 E.00313
G1 X126.393 Y119.958 F9000
G1 F2400
G1 X126.484 Y119.628 E.01159
G1 X126.484 Y115.372 E.14407
G1 X126.403 Y115.07 E.01058
G1 X126.218 Y114.829 E.01028
G1 X125.911 Y114.652 E.01202
G1 X125.694 Y114.623 E.00742
G1 X102.226 Y114.616 E.79436
G1 X102.226 Y112.229 E.0808
G1 X133.378 Y112.229 E1.05448
G1 X133.378 Y122.771 E.35683
G1 X102.226 Y122.771 E1.05448
G1 X102.226 Y120.384 E.08081
G1 X125.863 Y120.37 E.80008
G1 X126.175 Y120.203 E.01198
G1 X126.353 Y120.003 E.00906
G1 X125.919 Y119.878 F9000
;TYPE:External perimeter
G1 F1500
G1 X126.029 Y119.755 E.0056
G1 X126.077 Y119.575 E.00631
G1 X126.077 Y115.425 E.14045
G1 X126.031 Y115.254 E.00602
G1 X125.945 Y115.141 E.0048
G1 X125.778 Y115.045 E.00653
G1 X125.667 Y115.03 E.00378
G1 X101.819 Y115.023 E.80721
G1 X101.819 Y111.822 E.10836
G1 X133.785 Y111.822 E1.08204
G1 X133.785 Y123.178 E.38439
G1 X101.819 Y123.178 E1.08204
G1 X101.821 Y119.977 E.10836
G1 X125.76 Y119.963 E.81031
G1 X125.866 Y119.907 E.00405
G1 X126.065 Y119.955 F9000
G1 X126.042 Y121.571
;TYPE:Gap fill
;WIDTH:0.408304
G1 F1800
G1 X103.243 Y121.577 E.69267
G1 E-3.5 F6000
;WIPE_START
G1 F7200
G1 X105.043 Y121.576 E-1.425
;WIPE_END
G1 E-.075 F6000
G1 Z1.9 F9000
G1 X133.4 Y122.792
G1 X133.4 Y112.208
G1 X103.243 Y113.423
G1 Z1.4
G1 E5 F2400
;WIDTH:0.401434
G1 F1800
G1 X125.76 Y113.426 E.67124
;WIDTH:0.401436
G1 X125.761 Y113.426 E0
;WIDTH:0.401436
G1 X125.928 Y113.616 E.00755
G1 X127.269 Y113.654 F9000
;TYPE:Solid infill
;WIDTH:0.488406
G1 F2400
G1 X127.635 Y114.02 E.01919
G1 X128.265 Y114.02 E.02334
G1 X128.082 Y113.837 E.00959
G1 X128.712 Y113.837 E.02334
G1 X128.895 Y114.02 E.00959
G1 X129.525 Y114.02 E.02334
G1 X129.342 Y113.837 E.00959
G1 X129.972 Y113.837 E.02334
G1 X130.155 Y114.02 E.00959
G1 X130.785 Y114.02 E.02334
G1 X130.602 Y113.837 E.00959
G1 X131.232 Y113.837 E.02334
G1 X131.599 Y114.203 E.01919
G1 E-5 F6000
G1 Z1.9 F9000
G1 X129.053 Y114.427
G1 Z1.4
G1 E5 F2400
;TYPE:Internal infill
;WIDTH:0.45
G1 F3000
G1 X127.896 Y114.427 E.03916
G1 X128.092 Y115.16 E.02569
G1 X128.092 Y115.687 E.01783
G1 X131.77 Y114.701 E.1289
G1 X131.77 Y114.427 E.00927
G1 X129.644 Y114.427 E.07198
G1 X131.77 Y116.554 E.1018
G1 X131.77 Y117.039 E.01643
G1 X130.824 Y120.573 E.12383
G1 X131.77 Y120.573 E.03205
G1 X131.77 Y119.758 E.02757
G1 X128.731 Y120.573 E.10652
G1 X128.881 Y120.573 E.00509
G1 X128.092 Y119.784 E.03778
G1 X128.092 Y117.341 E.08267
G1 E-5 F6000
G1 Z1.9 F9000
G1 X127.541 Y120.811
G1 Z1.4
G1 E5 F2400
;TYPE:Solid infill
;WIDTH:0.457389
G1 X127.892 Y121.163 E.01714
G1 X128.478 Y121.163 E.0202
G1 X128.295 Y120.98 E.00892
G1 X128.882 Y120.98 E.0202
G1 X129.065 Y121.163 E.00892
G1 X129.651 Y121.163 E.0202
G1 X129.468 Y120.98 E.00892
G1 X130.054 Y120.98 E.0202
G1 X130.237 Y121.163 E.00892
G1 X130.823 Y121.163 E.0202
G1 X130.64 Y120.98 E.00892
G1 X131.226 Y120.98 E.0202
G1 X131.592 Y121.346 E.01785
M106 S249.9
;LAYER_CHANGE
;Z:1.6
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;1.6


G1 E-3.5 F6000
;WIPE_START
G1 F7200
G1 X131.226 Y120.98 E-.41003
G1 X130.64 Y120.98 E-.46403
G1 X130.823 Y121.163 E-.20494
G1 X130.386 Y121.163 E-.34599
;WIPE_END
G1 E-.075 F6000
G1 Z1.9 F9000
;AFTER_LAYER_CHANGE
;1.6
G1 X126.886 Y113.566
G1 Z1.6
G1 E5 F2400
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X132.157 Y113.566 E.17842
G1 X132.157 Y121.434 E.26634
G1 X126.473 Y121.434 E.19241
G1 X127.15 Y121.043 E.02647
G1 X127.635 Y120.204 E.03279
G1 X127.705 Y119.666 E.01836
G1 X127.705 Y115.22 E.15049
G1 X127.536 Y114.564 E.02295
G1 X127.066 Y113.908 E.0273
G1 X126.473 Y113.566 E.0232
G1 X126.826 Y113.566 E.01196
G1 X126.095 Y113.855 F9000
G1 F2400
G1 X125.747 Y113.809 E.01188
G1 X103.155 Y113.802 E.7647
G1 X103.155 Y113.159 E.02179
G1 X132.564 Y113.159 E.99546
G1 X132.564 Y121.841 E.2939
G1 X103.155 Y121.841 E.99546
G1 X103.155 Y121.197 E.0218
G1 X126.092 Y121.184 E.77637
G1 X126.852 Y120.745 E.02972
G1 X127.242 Y120.071 E.02636
G1 X127.298 Y119.64 E.01471
G1 X127.298 Y115.272 E.14784
G1 X127.161 Y114.739 E.01863
G1 X126.787 Y114.217 E.02174
G1 X126.155 Y113.862 E.02453
G1 X126.096 Y114.289 F9000
G1 F2400
G1 X126.044 Y114.259 E.00203
G1 X125.72 Y114.216 E.01106
G1 X102.748 Y114.209 E.77758
G1 X102.748 Y112.752 E.04934
G1 X132.971 Y112.752 E1.02301
G1 X132.971 Y122.248 E.32146
G1 X102.748 Y122.248 E1.02301
G1 X102.748 Y120.79 E.04935
G1 X125.982 Y120.777 E.78645
G1 X126.554 Y120.447 E.02234
G1 X126.849 Y119.937 E.01993
G1 X126.891 Y119.613 E.01107
G1 X126.891 Y115.323 E.1452
G1 X126.786 Y114.914 E.0143
G1 X126.507 Y114.526 E.01619
G1 X126.148 Y114.319 E.01402
G1 X126.087 Y114.753 F9000
G1 F2400
G1 X125.911 Y114.652 E.00689
G1 X125.694 Y114.623 E.00742
G1 X102.341 Y114.616 E.79045
G1 X102.341 Y112.345 E.0769
G1 X133.378 Y112.345 E1.05057
G1 X133.378 Y122.655 E.34901
G1 X102.341 Y122.655 E1.05057
G1 X102.341 Y120.384 E.0769
G1 X125.873 Y120.37 E.79653
G1 X126.256 Y120.149 E.01496
G1 X126.455 Y119.804 E.01349
G1 X126.484 Y119.586 E.00743
G1 X126.484 Y115.375 E.14255
G1 X126.411 Y115.09 E.00997
G1 X126.228 Y114.834 E.01063
G1 X126.139 Y114.783 E.00346
G1 X126.035 Y115.265 F9000
;TYPE:External perimeter
G1 F1500
G1 X125.948 Y115.143 E.00508
G1 X125.778 Y115.045 E.00666
G1 X125.667 Y115.03 E.00378
G1 X101.934 Y115.023 E.80332
G1 X101.934 Y111.937 E.10445
G1 X133.785 Y111.937 E1.07813
G1 X133.785 Y123.063 E.37657
G1 X101.934 Y123.063 E1.07813
G1 X101.934 Y119.977 E.10445
G1 X125.764 Y119.963 E.80662
G1 X125.958 Y119.851 E.00758
G1 X126.062 Y119.671 E.00706
G1 X126.077 Y119.56 E.00378
G1 X126.077 Y115.427 E.1399
G1 X126.05 Y115.323 E.00362
G1 X126.124 Y115.144 F9000
G1 X126.275 Y113.517
;TYPE:Gap fill
;WIDTH:0.333048
G1 F1800
G1 X125.776 Y113.484 E.01206
;WIDTH:0.287009
G1 X125.76 Y113.484 E.00032
;WIDTH:0.285964
G1 X103.359 Y113.481 E.45272
G1 E-3.5 F6000
;WIPE_START
G1 F7200
G1 X105.159 Y113.481 E-1.425
;WIPE_END
G1 E-.075 F6000
G1 Z2.1 F9000
G1 X133.4 Y112.323
G1 X133.4 Y122.677
G1 X103.359 Y121.519
G1 Z1.6
G1 E5 F2400
;WIDTH:0.293
G1 F1800
G1 X126.146 Y121.513 E.47385
;WIDTH:0.293208
G1 X126.153 Y121.513 E.00015
;WIDTH:0.293209
G1 X126.198 Y121.436 E.00184
;WIDTH:0.247334
G1 X126.242 Y121.359 E.00151
G1 X127.908 Y121.231 F9000
;TYPE:Solid infill
;WIDTH:0.487456
G1 F2400
G1 X128.159 Y120.98 E.01311
G1 X128.787 Y120.98 E.02324
G1 X128.72 Y121.048 E.00353
G1 X129.348 Y121.048 E.02324
G1 X129.416 Y120.98 E.00353
G1 X130.045 Y120.98 E.02324
G1 X129.977 Y121.048 E.00353
G1 X130.606 Y121.048 E.02324
G1 X130.673 Y120.98 E.00353
G1 X131.302 Y120.98 E.02324
G1 X131.051 Y121.231 E.01311
G1 X131.057 Y120.754 F9000
;TYPE:Bridge infill
;WIDTH:0.392494
;HEIGHT:0.389872
M106 S255
G1 F1500
G1 X131.754 Y120.058 E.04957
G1 X131.754 Y119.432 E.03148
G1 X130.629 Y120.556 E.08001
G1 X130.004 Y120.556 E.03148
G1 X131.754 Y118.806 E.12452
G1 X131.754 Y118.18 E.03148
G1 X129.378 Y120.556 E.16904
G1 X128.752 Y120.556 E.03148
G1 X131.754 Y117.554 E.21356
G1 X131.754 Y116.929 E.03148
G1 X128.126 Y120.556 E.25807
G1 X128.108 Y120.556 E.0009
G1 X128.108 Y119.949 E.03058
G1 X131.754 Y116.303 E.25934
G1 X131.754 Y115.677 E.03148
G1 X128.108 Y119.323 E.25934
G1 X128.108 Y118.697 E.03148
G1 X131.754 Y115.051 E.25934
G1 X131.754 Y114.444 E.03058
G1 X131.736 Y114.444 E.0009
G1 X128.108 Y118.071 E.25807
G1 X128.108 Y117.445 E.03148
G1 X131.11 Y114.444 E.21355
G1 X130.485 Y114.444 E.03148
G1 X128.108 Y116.82 E.16903
G1 X128.108 Y116.194 E.03148
G1 X129.859 Y114.444 E.12452
G1 X129.233 Y114.444 E.03148
G1 X128.108 Y115.568 E.08
G1 X128.108 Y114.942 E.03148
G1 X128.805 Y114.246 E.04956
M106 S249.9
G1 X127.653 Y114.377 F9000
;TYPE:Solid infill
;WIDTH:0.496322
;HEIGHT:0.2
G1 F2400
G1 X128.077 Y113.952 E.02263
G1 X128.718 Y113.952 E.02417
G1 X128.651 Y114.02 E.0036
G1 X129.292 Y114.02 E.02417
G1 X129.36 Y113.952 E.0036
G1 X130.001 Y113.952 E.02417
G1 X129.933 Y114.02 E.0036
G1 X130.574 Y114.02 E.02417
G1 X130.642 Y113.952 E.0036
G1 X131.283 Y113.952 E.02417
G1 X131.032 Y114.203 E.01337
M106 S252.45
;LAYER_CHANGE
;Z:1.8
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;1.8


G1 E-3.5 F6000
;WIPE_START
G1 F7200
G1 X131.283 Y113.952 E-.28074
G1 X130.642 Y113.952 E-.50762
G1 X130.574 Y114.02 E-.07565
G1 X129.933 Y114.02 E-.50762
G1 X129.981 Y113.972 E-.05336
;WIPE_END
G1 E-.075 F6000
G1 Z2.1 F9000
;AFTER_LAYER_CHANGE
;1.8
G1 X126.736 Y113.681
G1 Z1.8
G1 E5 F2400
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X132.157 Y113.681 E.1835
G1 X132.157 Y121.319 E.25852
G1 X126.731 Y121.319 E.18367
G1 X126.802 Y121.289 E.0026
G1 X127.487 Y120.604 E.03279
G1 X127.705 Y119.789 E.02857
G1 X127.705 Y115.211 E.15496
G1 X127.52 Y114.519 E.02424
G1 X127.039 Y113.893 E.02672
G1 X126.676 Y113.681 E.01423
G1 X126.48 Y114.04 F9000
G1 F2400
G1 X126.178 Y113.865 E.01183
G1 X125.747 Y113.809 E.01471
G1 X103.271 Y113.802 E.76079
G1 X103.271 Y113.274 E.01788
G1 X132.564 Y113.274 E.99155
G1 X132.564 Y121.726 E.28608
G1 X103.271 Y121.726 E.99155
G1 X103.271 Y121.197 E.01789
G1 X125.992 Y121.184 E.76908
G1 X126.571 Y120.944 E.02123
G1 X127.122 Y120.394 E.02636
G1 X127.298 Y119.735 E.02307
G1 X127.298 Y115.265 E.15133
G1 X127.148 Y114.703 E.01969
G1 X126.766 Y114.205 E.02124
G1 X126.532 Y114.07 E.00912
G1 X126.062 Y114.269 F9000
G1 F2400
G1 X125.72 Y114.216 E.01171
G1 X102.864 Y114.209 E.77367
G1 X102.864 Y112.867 E.04543
G1 X132.971 Y112.867 E1.01911
G1 X132.971 Y122.133 E.31364
G1 X102.864 Y122.133 E1.01911
G1 X102.864 Y120.79 E.04544
G1 X125.911 Y120.777 E.78011
G1 X126.341 Y120.599 E.01575
G1 X126.757 Y120.183 E.01993
G1 X126.891 Y119.682 E.01756
G1 X126.891 Y115.318 E.1477
G1 X126.775 Y114.886 E.01513
G1 X126.492 Y114.517 E.01576
G1 X126.114 Y114.299 E.01477
G1 X126.065 Y114.74 F9000
G1 F2400
G1 X125.911 Y114.652 E.00601
G1 X125.694 Y114.623 E.00742
G1 X102.457 Y114.616 E.78654
G1 X102.457 Y112.46 E.07299
G1 X133.378 Y112.46 E1.04666
G1 X133.378 Y122.54 E.3412
G1 X102.457 Y122.54 E1.04666
G1 X102.457 Y120.384 E.07299
G1 X125.83 Y120.37 E.79115
G1 X126.11 Y120.254 E.01027
G1 X126.392 Y119.972 E.01349
G1 X126.484 Y119.628 E.01205
G1 X126.484 Y115.372 E.14407
G1 X126.403 Y115.07 E.01058
G1 X126.218 Y114.829 E.01028
G1 X126.117 Y114.77 E.00397
G1 X126.031 Y115.254 F9000
;TYPE:External perimeter
G1 F1500
G1 X125.945 Y115.141 E.0048
G1 X125.778 Y115.045 E.00653
G1 X125.667 Y115.03 E.00378
G1 X102.05 Y115.023 E.79939
G1 X102.05 Y112.053 E.10054
G1 X133.785 Y112.053 E1.07422
G1 X133.785 Y122.947 E.36876
G1 X102.05 Y122.947 E1.07422
G1 X102.05 Y119.977 E.10054
G1 X125.749 Y119.963 E.80216
G1 X125.879 Y119.909 E.00479
G1 X126.027 Y119.761 E.00706
G1 X126.077 Y119.575 E.00655
G1 X126.077 Y115.425 E.14045
G1 X126.047 Y115.311 E.00399
G1 X126.112 Y115.137 F9000
G1 X126.257 Y113.574
;TYPE:Gap fill
;WIDTH:0.247951
G1 F1800
G1 X126.481 Y113.611 E.00387
G1 X126.257 Y113.574 F9000
;WIDTH:0.23504
G1 F1800
G1 X126.013 Y113.558 E.00391
;WIDTH:0.203041
G1 X125.769 Y113.542 E.00326
;WIDTH:0.171044
G1 X125.76 Y113.541 E.00009
;WIDTH:0.170494
G1 X103.474 Y113.538 E.23641
G1 E-3.5 F6000
;WIPE_START
G1 F7200
G1 X105.274 Y113.539 E-1.425
;WIPE_END
G1 E-.075 F6000
G1 Z2.3 F9000
G1 X133.4 Y112.439
G1 X133.4 Y122.561
G1 X103.474 Y121.462
G1 Z1.8
G1 E5 F2400
;WIDTH:0.177468
G1 F1800
G1 X126.032 Y121.455 E.25237
;WIDTH:0.18279
G1 X126.059 Y121.452 E.00031
;WIDTH:0.227559
G1 X126.217 Y121.421 E.00246
;WIDTH:0.272329
G1 X126.374 Y121.39 E.00306
;WIDTH:0.317098
G1 X126.531 Y121.358 E.00366
G1 X128.313 Y121.115 F9000
;TYPE:Solid infill
;WIDTH:0.459977
G1 F2400
G1 X127.869 Y120.671 E.02177
G1 X127.994 Y120.206 E.0167
G1 X128.72 Y120.932 E.0356
G1 X129.31 Y120.932 E.02045
G1 X128.092 Y119.714 E.05972
G1 X128.092 Y119.125 E.02045
G1 X129.9 Y120.932 E.08864
G1 X130.489 Y120.932 E.02045
G1 X128.092 Y118.535 E.11757
G1 X128.092 Y117.945 E.02045
G1 X131.079 Y120.932 E.14649
G1 X131.669 Y120.932 E.02045
G1 X128.092 Y117.355 E.17542
G1 X128.092 Y116.765 E.02045
G1 X131.77 Y120.444 E.1804
G1 X131.77 Y119.854 E.02045
G1 X128.092 Y116.176 E.1804
G1 X128.092 Y115.586 E.02045
G1 X131.77 Y119.264 E.1804
G1 X131.77 Y118.674 E.02045
G1 X128.032 Y114.936 E.18334
G1 X127.874 Y114.345 E.02122
G1 X127.661 Y114.068 E.0121
G1 X127.754 Y114.068 E.00322
G1 X131.77 Y118.084 E.19698
G1 X131.77 Y117.495 E.02045
G1 X128.344 Y114.068 E.16806
G1 X128.934 Y114.068 E.02045
G1 X131.77 Y116.905 E.13913
G1 X131.77 Y116.315 E.02045
G1 X129.523 Y114.068 E.11021
G1 X130.113 Y114.068 E.02045
G1 X131.77 Y115.725 E.08128
G1 X131.77 Y115.135 E.02045
G1 X130.703 Y114.068 E.05235
G1 X131.293 Y114.068 E.02045
G1 X131.954 Y114.729 E.03241
;LAYER_CHANGE
;Z:2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;2


G1 E-3.5 F6000
;WIPE_START
G1 F7200
G1 X131.293 Y114.068 E-.73992
G1 X130.703 Y114.068 E-.46693
G1 X130.898 Y114.263 E-.21815
;WIPE_END
G1 E-.075 F6000
G1 Z2.3 F9000
;AFTER_LAYER_CHANGE
;2
G1 X127.705 Y118.581
G1 Z2
G1 E5 F2400
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X127.705 Y115.211 E.11408
G1 X127.52 Y114.519 E.02424
G1 X127.115 Y113.992 E.0225
G1 X126.861 Y113.797 E.01085
G1 X132.157 Y113.797 E.17927
G1 X132.157 Y121.203 E.25071
G1 X126.873 Y121.203 E.17887
G1 X127.039 Y121.107 E.00651
G1 X127.52 Y120.481 E.02672
G1 X127.705 Y119.789 E.02424
G1 X127.705 Y118.641 E.03885
G1 X127.298 Y118.874 F9000
G1 F2080
G1 X127.298 Y115.265 E.12218
G1 X127.148 Y114.703 E.01969
G1 X126.825 Y114.282 E.01795
G1 X126.404 Y113.959 E.01795
G1 X125.843 Y113.809 E.01968
G1 X103.386 Y113.806 E.76012
G1 X103.386 Y113.39 E.01409
G1 X132.564 Y113.39 E.98764
G1 X132.564 Y121.61 E.27826
G1 X103.386 Y121.61 E.98764
G1 X103.386 Y121.197 E.01398
G1 X126.092 Y121.184 E.76855
G1 X126.766 Y120.795 E.02634
G1 X127.148 Y120.297 E.02124
G1 X127.298 Y119.735 E.01969
G1 X127.298 Y118.934 E.02712
G1 X126.891 Y119.167 F9000
G1 F2080
G1 X126.891 Y115.318 E.13027
G1 X126.775 Y114.886 E.01513
G1 X126.535 Y114.572 E.01339
G1 X126.221 Y114.332 E.01339
G1 X125.789 Y114.216 E.01513
G1 X102.979 Y114.213 E.77208
G1 X102.979 Y112.983 E.04165
G1 X132.971 Y112.983 E1.0152
G1 X132.971 Y122.017 E.30582
G1 X102.979 Y122.017 E1.0152
G1 X102.979 Y120.79 E.04153
G1 X125.983 Y120.777 E.77863
G1 X126.492 Y120.483 E.01991
G1 X126.775 Y120.114 E.01576
G1 X126.891 Y119.682 E.01513
G1 X126.891 Y119.227 E.0154
G1 X126.484 Y119.46 F9000
G1 F2080
G1 X126.484 Y115.372 E.13837
G1 X126.403 Y115.07 E.01058
G1 X126.244 Y114.863 E.00884
G1 X126.037 Y114.704 E.00884
G1 X125.735 Y114.623 E.01058
G1 X102.572 Y114.62 E.78404
G1 X102.572 Y112.575 E.0692
G1 X133.378 Y112.575 E1.04276
G1 X133.378 Y122.425 E.33338
G1 X102.572 Y122.425 E1.04276
G1 X102.572 Y120.384 E.06908
G1 X125.873 Y120.37 E.78872
G1 X126.218 Y120.171 E.01349
G1 X126.403 Y119.93 E.01028
G1 X126.484 Y119.628 E.01058
G1 X126.484 Y119.52 E.00367
G1 X126.031 Y119.746 F9000
;TYPE:External perimeter
G1 F1500
G1 X126.077 Y119.575 E.00602
G1 X126.077 Y115.425 E.14045
G1 X126.031 Y115.254 E.00602
G1 X125.954 Y115.153 E.00428
G1 X125.854 Y115.076 E.00428
G1 X125.682 Y115.03 E.00602
G1 X102.182 Y115.027 E.79542
G1 X102.165 Y115.019 E.00064
G1 X102.165 Y112.168 E.09651
G1 X133.785 Y112.168 E1.07031
G1 X133.785 Y122.832 E.36094
G1 X102.165 Y122.832 E1.07031
G1 X102.167 Y119.977 E.09663
G1 X125.764 Y119.963 E.79872
G1 X125.945 Y119.859 E.00706
G1 X125.994 Y119.794 E.00277
G1 X126.209 Y119.737 F9000
G1 E-5 F6000
G1 Z2.5 F9000
G1 X131.13 Y121
G1 Z2
G1 E5 F2400
;TYPE:Solid infill
;WIDTH:0.450204
G1 F2080
G1 X131.77 Y120.36 E.03066
G1 X131.77 Y119.784 E.01951
G1 X130.737 Y120.817 E.04947
G1 X130.162 Y120.817 E.01951
G1 X131.77 Y119.208 E.07706
G1 X131.77 Y118.632 E.01951
G1 X129.586 Y120.817 E.10464
G1 X129.01 Y120.817 E.01951
G1 X131.77 Y118.056 E.13223
G1 X131.77 Y117.48 E.01951
G1 X128.434 Y120.817 E.15982
G1 X127.858 Y120.817 E.01951
G1 X131.77 Y116.904 E.1874
G1 X131.77 Y116.328 E.01951
G1 X128.031 Y120.067 E.17908
G1 X128.092 Y119.84 E.00796
G1 X128.092 Y119.43 E.01388
G1 X131.77 Y115.752 E.17617
G1 X131.77 Y115.176 E.01951
G1 X128.092 Y118.854 E.17617
G1 X128.092 Y118.278 E.01951
G1 X131.77 Y114.6 E.17617
G1 X131.77 Y114.183 E.0141
G1 X131.611 Y114.183 E.00541
G1 X128.092 Y117.702 E.16852
G1 X128.092 Y117.126 E.01951
G1 X131.035 Y114.183 E.14094
G1 X130.459 Y114.183 E.01951
G1 X128.092 Y116.55 E.11335
G1 X128.092 Y115.974 E.01951
G1 X129.883 Y114.183 E.08577
G1 X129.307 Y114.183 E.01951
G1 X128.092 Y115.398 E.05818
G1 X128.092 Y115.16 E.00806
G1 X128.021 Y114.894 E.00934
G1 X128.731 Y114.183 E.03401
G1 X128.155 Y114.183 E.01951
G1 X127.749 Y114.589 E.01942
G1 X126.668 Y113.731 F9000
;TYPE:Gap fill
;WIDTH:0.251948
G1 F1800
G1 X126.557 Y113.694 E.00204
;WIDTH:0.243679
G1 X126.52 Y113.685 E.00064
;WIDTH:0.226056
G1 X126.347 Y113.662 E.00265
;WIDTH:0.183011
G1 X126.175 Y113.639 E.00203
;WIDTH:0.139966
G1 X126.002 Y113.617 E.0014
;LAYER_CHANGE
;Z:2.2
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;2.2


G1 E-3.5 F6000
;WIPE_START
G1 F7200
G1 X126.175 Y113.639 E-.13767
;WIPE_END
G1 E-1.36233 F6000
G1 Z2.5 F9000
;AFTER_LAYER_CHANGE
;2.2
G1 X127.705 Y119.531
G1 Z2.2
G1 E5 F2400
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X127.705 Y115.242 E.14517
G1 X127.563 Y114.633 E.02115
G1 X127.119 Y113.956 E.02742
G1 X127.049 Y113.912 E.00279
G1 X132.157 Y113.912 E.17289
G1 X132.157 Y121.088 E.24289
G1 X127.022 Y121.088 E.17384
G1 X127.501 Y120.551 E.02438
G1 X127.705 Y119.789 E.02669
G1 X127.705 Y119.591 E.00671
G1 X127.298 Y119.63 F9000
G1 F1982
G1 X127.298 Y115.289 E.14694
G1 X127.183 Y114.796 E.01712
G1 X126.828 Y114.254 E.02194
G1 X126.269 Y113.906 E.02229
G1 X125.801 Y113.809 E.01618
G1 X103.502 Y113.806 E.75481
G1 X103.502 Y113.505 E.01017
G1 X132.564 Y113.505 E.98373
G1 X132.564 Y121.495 E.27045
G1 X103.502 Y121.495 E.98373
G1 X103.502 Y121.197 E.0101
G1 X126.066 Y121.184 E.76379
G1 X126.685 Y120.854 E.02374
G1 X127.133 Y120.352 E.02278
G1 X127.298 Y119.69 E.02309
G1 X126.879 Y119.727 F9000
G1 F1982
G1 X126.891 Y115.335 E.14866
G1 X126.803 Y114.959 E.01309
G1 X126.537 Y114.552 E.01645
G1 X126.115 Y114.29 E.01681
G1 X125.759 Y114.216 E.01231
G1 X103.095 Y114.213 E.76716
G1 X103.095 Y113.098 E.03773
G1 X132.971 Y113.098 E1.01129
G1 X132.971 Y121.902 E.298
G1 X103.095 Y121.902 E1.01129
G1 X103.095 Y120.79 E.03765
G1 X125.964 Y120.777 E.77411
G1 X126.429 Y120.529 E.01785
G1 X126.765 Y120.153 E.01706
G1 X126.863 Y119.785 E.01288
G1 X126.432 Y119.821 F9000
G1 F1982
G1 X126.484 Y119.628 E.00677
G1 X126.484 Y115.382 E.14372
G1 X126.423 Y115.122 E.00906
G1 X126.246 Y114.85 E.01097
G1 X125.962 Y114.674 E.01132
G1 X125.717 Y114.623 E.00845
G1 X102.688 Y114.62 E.77952
G1 X102.688 Y112.691 E.06529
G1 X133.378 Y112.691 E1.03885
G1 X133.378 Y122.309 E.32556
G1 X102.688 Y122.309 E1.03885
G1 X102.688 Y120.383 E.0652
G1 X125.862 Y120.37 E.78443
G1 X126.174 Y120.204 E.01195
G1 X126.397 Y119.954 E.01134
G1 X126.417 Y119.879 E.00261
G1 X125.918 Y119.879 F9000
;TYPE:External perimeter
G1 F1500
G1 X126.029 Y119.755 E.00562
G1 X126.077 Y119.575 E.00632
G1 X126.077 Y115.429 E.14032
G1 X126.043 Y115.284 E.00503
G1 X125.954 Y115.149 E.00549
G1 X125.808 Y115.058 E.00584
G1 X125.675 Y115.03 E.00459
G1 X102.295 Y115.027 E.79138
G1 X102.281 Y115.02 E.00054
G1 X102.281 Y112.284 E.09262
G1 X133.785 Y112.284 E1.06641
G1 X133.785 Y122.716 E.35312
G1 X102.281 Y122.716 E1.06641
G1 X102.285 Y119.976 E.09275
G1 X125.76 Y119.963 E.79462
G1 X125.865 Y119.907 E.00403
G1 X126.065 Y119.956 F9000
G1 X126.712 Y121.095
;TYPE:Gap fill
;WIDTH:0.130543
G1 F1800
G1 X126.587 Y121.193 E.00116
;WIDTH:0.164166
G1 X126.463 Y121.291 E.0016
G1 X127.802 Y120.216 F9000
;TYPE:Solid infill
;WIDTH:0.458838
G1 F1982
G1 X128.286 Y120.701 E.02371
G1 X128.874 Y120.701 E.02034
G1 X128.075 Y119.902 E.03908
G1 X128.092 Y119.84 E.00223
G1 X128.092 Y119.331 E.01762
G1 X129.463 Y120.701 E.06703
G1 X130.051 Y120.701 E.02034
G1 X128.092 Y118.742 E.0958
G1 X128.092 Y118.154 E.02034
G1 X130.639 Y120.701 E.12457
G1 X131.227 Y120.701 E.02034
G1 X128.092 Y117.566 E.15334
G1 X128.092 Y116.978 E.02034
G1 X131.77 Y120.656 E.1799
G1 X131.77 Y120.068 E.02034
G1 X128.092 Y116.39 E.1799
G1 X128.092 Y115.801 E.02034
G1 X131.77 Y119.48 E.1799
G1 X131.77 Y118.892 E.02034
G1 X128.092 Y115.213 E.1799
G1 X127.925 Y114.479 E.02605
G1 X127.884 Y114.417 E.00255
G1 X131.77 Y118.303 E.19008
G1 X131.77 Y117.715 E.02034
G1 X128.354 Y114.299 E.16709
G1 X128.942 Y114.299 E.02034
G1 X131.77 Y117.127 E.13832
G1 X131.77 Y116.539 E.02034
G1 X129.531 Y114.299 E.10955
G1 X130.119 Y114.299 E.02034
G1 X131.77 Y115.951 E.08078
G1 X131.77 Y115.362 E.02034
G1 X130.707 Y114.299 E.05201
G1 X131.295 Y114.299 E.02034
G1 X131.954 Y114.957 E.03221
;LAYER_CHANGE
;Z:2.4
;HEIGHT:0.2
;BEFORE_LAYER_CHANGE
;2.4


G1 E-3.5 F6000
;WIPE_START
G1 F7200
G1 X131.295 Y114.299 E-.73722
G1 X130.707 Y114.299 E-.46566
G1 X130.905 Y114.497 E-.22213
;WIPE_END
G1 E-.075 F6000
G1 Z2.7 F9000
;AFTER_LAYER_CHANGE
;2.4
G1 X127.705 Y119.551
G1 Z2.4
G1 E5 F2400
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X127.705 Y115.334 E.14275
G1 X127.635 Y114.796 E.01836
G1 X127.191 Y114.028 E.03003
G1 X132.157 Y114.028 E.1681
G1 X132.157 Y120.972 E.23507
G1 X127.12 Y120.972 E.17049
G1 X127.46 Y120.64 E.01609
G1 X127.705 Y119.815 E.02914
G1 X127.705 Y119.611 E.0069
G1 X127.295 Y119.765 F9000
G1 F2095
G1 X127.298 Y115.36 E.1491
G1 X127.242 Y114.929 E.01471
G1 X126.852 Y114.255 E.02636
G1 X126.178 Y113.866 E.02636
G1 X125.747 Y113.809 E.01471
G1 X103.617 Y113.805 E.74906
G1 X103.617 Y113.621 E.00625
G1 X132.564 Y113.621 E.97982
G1 X132.564 Y121.379 E.26263
G1 X103.617 Y121.379 E.97982
G1 X103.617 Y121.195 E.00623
G1 X125.992 Y121.184 E.75735
G1 X126.564 Y120.947 E.02096
G1 X127.1 Y120.423 E.02539
G1 X127.278 Y119.823 E.02119
G1 X126.851 Y119.83 F9000
G1 F2095
G1 X126.891 Y119.696 E.00473
G1 X126.891 Y115.387 E.14587
G1 X126.849 Y115.063 E.01107
G1 X126.554 Y114.553 E.01992
G1 X126.044 Y114.259 E.01993
G1 X125.72 Y114.216 E.01107
G1 X103.21 Y114.212 E.76194
G1 X103.21 Y113.213 E.03381
G1 X132.971 Y113.213 E1.00738
G1 X132.971 Y121.787 E.29019
G1 X103.21 Y121.787 E1.00738
G1 X103.21 Y120.788 E.03378
G1 X125.911 Y120.777 E.76839
G1 X126.335 Y120.601 E.01556
G1 X126.74 Y120.206 E.01915
G1 X126.834 Y119.888 E.01122
G1 X126.407 Y119.895 F9000
G1 F2095
G1 X126.484 Y119.637 E.00913
G1 X126.484 Y115.414 E.14296
G1 X126.455 Y115.196 E.00743
G1 X126.256 Y114.851 E.01349
G1 X125.911 Y114.652 E.01349
G1 X125.694 Y114.623 E.00742
G1 X102.803 Y114.619 E.77481
G1 X102.803 Y112.806 E.06137
G1 X133.378 Y112.806 E1.03494
G1 X133.378 Y122.194 E.31775
G1 X102.803 Y122.194 E1.03494
G1 X102.803 Y120.382 E.06134
G1 X125.83 Y120.37 E.77942
G1 X126.107 Y120.255 E.01015
G1 X126.38 Y119.988 E.01292
G1 X126.39 Y119.953 E.00125
G1 X125.878 Y119.909 F9000
;TYPE:External perimeter
G1 F1500
G1 X126.019 Y119.771 E.00669
G1 X126.077 Y119.578 E.00683
G1 X126.077 Y115.44 E.14005
G1 X126.062 Y115.33 E.00378
G1 X125.958 Y115.149 E.00706
G1 X125.778 Y115.045 E.00706
G1 X125.667 Y115.03 E.00378
G1 X102.408 Y115.026 E.78728
G1 X102.396 Y112.399 E.08892
G1 X133.785 Y112.399 E1.0625
G1 X133.785 Y122.601 E.3453
G1 X102.396 Y122.601 E1.0625
G1 X102.401 Y119.975 E.08889
G1 X125.749 Y119.963 E.79028
G1 X125.823 Y119.932 E.00272
G1 X126.049 Y120.009 F9000
G1 E-5 F6000
G1 Z2.9 F9000
G1 X131.203 Y120.771
G1 Z2.4
G1 E5 F2400
;TYPE:Top solid infill
;WIDTH:0.414793
G1 F1800
G1 X131.795 Y120.179 E.02591
G1 X131.795 Y119.653 E.01626
G1 X130.838 Y120.611 E.04188
G1 X130.312 Y120.611 E.01626
G1 X131.795 Y119.127 E.06488
G1 X131.795 Y118.601 E.01626
G1 X129.786 Y120.611 E.08788
G1 X129.26 Y120.611 E.01626
G1 X131.795 Y118.075 E.11088
G1 X131.795 Y117.549 E.01626
G1 X128.734 Y120.611 E.13387
G1 X128.208 Y120.611 E.01626
G1 X131.795 Y117.023 E.15687
G1 X131.795 Y116.497 E.01626
G1 X127.915 Y120.378 E.16967
G1 X128.067 Y119.867 E.01646
G1 X128.067 Y119.7 E.00518
G1 X131.795 Y115.972 E.16304
G1 X131.795 Y115.446 E.01626
G1 X128.067 Y119.174 E.16304
G1 X128.067 Y118.648 E.01626
G1 X131.795 Y114.92 E.16304
G1 X131.795 Y114.394 E.01626
G1 X128.067 Y118.122 E.16304
G1 X128.067 Y117.596 E.01626
G1 X131.274 Y114.389 E.14024
G1 X130.748 Y114.389 E.01626
G1 X128.067 Y117.07 E.11724
G1 X128.067 Y116.544 E.01626
G1 X130.222 Y114.389 E.09424
G1 X129.696 Y114.389 E.01626
G1 X128.067 Y116.019 E.07125
G1 X128.067 Y115.493 E.01626
G1 X129.17 Y114.389 E.04825
G1 X128.644 Y114.389 E.01626
G1 X128.027 Y115.007 E.027
G1 X127.984 Y114.677 E.01027
G1 X127.928 Y114.58 E.00347
G1 X128.279 Y114.229 E.01537
G1 E-3.5 F6000
;WIPE_START
G1 F7200;_WIPE
G1 X127.928 Y114.58 E-.39358
G1 F7200;_WIPE
G1 X127.984 Y114.677 E-.08879
G1 F7200;_WIPE
G1 X128.027 Y115.007 E-.26298
G1 F7200;_WIPE
G1 X128.634 Y114.4 E-.67965
;WIPE_END
G1 E-.075 F6000
G1 Z2.9 F9000
M107
;TYPE:Custom
; Filament-specific end gcode 
;END gcode for filament
M104 S0 ; turn off temperature
M140 S0 ; turn off heatbed
M107 ; turn off fan
G1 Z12.9 F600 ; Move print head up
G1 X0 Y200 F3000 ; present print
M84 X Y E ; disable motors

M300 S440 P200
M300 S660 P250
M300 S880 P300
; filament used [mm] = 282.63
; filament used [cm3] = 0.68
; filament used [g] = 0.84
; filament cost = 0.02
; total filament used [g] = 0.84
; total filament cost = 0.02
; estimated printing time (normal mode) = 5m 58s

; prusaslicer_config = begin
; avoid_crossing_perimeters = 1
; avoid_crossing_perimeters_max_detour = 0
; bed_custom_model = 
; bed_custom_texture = 
; bed_shape = 0x0,235x0,235x235,0x235
; bed_temperature = 60
; before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
; between_objects_gcode = 
; bottom_fill_pattern = rectilinear
; bottom_solid_layers = 5
; bottom_solid_min_thickness = 0
; bridge_acceleration = 0
; bridge_angle = 0
; bridge_fan_speed = 100
; bridge_flow_ratio = 0.95
; bridge_speed = 25
; brim_separation = 0
; brim_type = outer_only
; brim_width = 0
; clip_multipart_objects = 1
; color_change_gcode = M600
; compatible_printers_condition_cummulative = "printer_model==\"ENDER3\" and nozzle_diameter[0]==0.4";printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/
; complete_objects = 1
; cooling = 1
; cooling_tube_length = 5
; cooling_tube_retraction = 91.5
; default_acceleration = 0
; default_filament_profile = "Creality PLA"
; default_print_profile = 0.20mm NORMAL
; deretract_speed = 40
; disable_fan_first_layers = 2
; dont_support_bridges = 0
; draft_shield = disabled
; duplicate_distance = 6
; elefant_foot_compensation = 0
; end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
; end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+10, max_print_height)} F600{endif} ; Move print head up\nG1 X0 Y200 F3000 ; present print\nM84 X Y E ; disable motors\n\nM300 S440 P200\nM300 S660 P250\nM300 S880 P300
; ensure_vertical_shell_thickness = 1
; external_perimeter_extrusion_width = 0.45
; external_perimeter_speed = 25
; external_perimeters_first = 0
; extra_loading_move = -2
; extra_perimeters = 1
; extruder_clearance_height = 25
; extruder_clearance_radius = 45
; extruder_colour = #FFFF00
; extruder_offset = 0x0
; extrusion_axis = E
; extrusion_multiplier = 1
; extrusion_width = 0.45
; fan_always_on = 1
; fan_below_layer_time = 100
; filament_colour = #DDDDDD
; filament_cooling_final_speed = 3.4
; filament_cooling_initial_speed = 2.2
; filament_cooling_moves = 4
; filament_cost = 20
; filament_density = 1.24
; filament_diameter = 1.75
; filament_load_time = 0
; filament_loading_speed = 28
; filament_loading_speed_start = 3
; filament_max_volumetric_speed = 15
; filament_minimal_purge_on_wipe_tower = 15
; filament_notes = ""
; filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
; filament_settings_id = "DIY PLA"
; filament_soluble = 0
; filament_spool_weight = 0
; filament_toolchange_delay = 0
; filament_type = PLA
; filament_unload_time = 0
; filament_unloading_speed = 90
; filament_unloading_speed_start = 100
; filament_vendor = Generic
; fill_angle = 45
; fill_density = 25%
; fill_pattern = cubic
; first_layer_acceleration = 0
; first_layer_acceleration_over_raft = 0
; first_layer_bed_temperature = 60
; first_layer_extrusion_width = 0.42
; first_layer_height = 0.2
; first_layer_speed = 20
; first_layer_speed_over_raft = 30
; first_layer_temperature = 230
; full_fan_speed_layer = 0
; fuzzy_skin = none
; fuzzy_skin_point_dist = 0.1
; fuzzy_skin_thickness = 0.3
; gap_fill_enabled = 1
; gap_fill_speed = 30
; gcode_comments = 0
; gcode_flavor = marlin
; gcode_label_objects = 0
; gcode_resolution = 0.0125
; high_current_on_filament_swap = 0
; host_type = octoprint
; infill_acceleration = 0
; infill_anchor = 600%
; infill_anchor_max = 50
; infill_every_layers = 1
; infill_extruder = 1
; infill_extrusion_width = 0.45
; infill_first = 0
; infill_only_where_needed = 0
; infill_overlap = 5%
; infill_speed = 50
; inherits_cummulative = "0.20mm NORMAL @ENDER3";"Generic PLA @CREALITY";"Creality ENDER-3"
; interface_shells = 0
; ironing = 0
; ironing_flowrate = 33%
; ironing_spacing = 0.1
; ironing_speed = 30
; ironing_type = top
; layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
; layer_height = 0.2
; machine_limits_usage = emit_to_gcode
; machine_max_acceleration_e = 5000
; machine_max_acceleration_extruding = 500
; machine_max_acceleration_retracting = 1000
; machine_max_acceleration_travel = 1500,1250
; machine_max_acceleration_x = 500
; machine_max_acceleration_y = 500
; machine_max_acceleration_z = 100
; machine_max_feedrate_e = 60
; machine_max_feedrate_x = 500
; machine_max_feedrate_y = 500
; machine_max_feedrate_z = 10
; machine_max_jerk_e = 5
; machine_max_jerk_x = 8
; machine_max_jerk_y = 8
; machine_max_jerk_z = 0.4
; machine_min_extruding_rate = 0
; machine_min_travel_rate = 0
; max_fan_speed = 100
; max_layer_height = 0.25
; max_print_height = 250
; max_print_speed = 100
; max_volumetric_speed = 0
; min_fan_speed = 30
; min_layer_height = 0.1
; min_print_speed = 15
; min_skirt_length = 4
; mmu_segmented_region_max_width = 0
; notes = 
; nozzle_diameter = 0.4
; only_retract_when_crossing_perimeters = 0
; ooze_prevention = 0
; output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
; overhangs = 1
; parking_pos_retraction = 92
; pause_print_gcode = M601
; perimeter_acceleration = 0
; perimeter_extruder = 1
; perimeter_extrusion_width = 0.45
; perimeter_speed = 40
; perimeters = 5
; physical_printer_settings_id = 
; post_process = 
; print_settings_id = 0.20mm NORMAL @ENDER3 - Kopieren
; printer_model = ENDER3
; printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3
; printer_settings_id = Guddaffs ENDER-3
; printer_technology = FFF
; printer_variant = 0.4
; printer_vendor = 
; raft_contact_distance = 0.1
; raft_expansion = 1.5
; raft_first_layer_density = 90%
; raft_first_layer_expansion = 3
; raft_layers = 0
; remaining_times = 0
; resolution = 0
; retract_before_travel = 2
; retract_before_wipe = 70%
; retract_layer_change = 1
; retract_length = 5
; retract_length_toolchange = 1
; retract_lift = 0.5
; retract_lift_above = 0
; retract_lift_below = 0
; retract_restart_extra = 0
; retract_restart_extra_toolchange = 0
; retract_speed = 100
; seam_position = nearest
; silent_mode = 0
; single_extruder_multi_material = 0
; single_extruder_multi_material_priming = 1
; skirt_distance = 2
; skirt_height = 1
; skirts = 2
; slice_closing_radius = 0.049
; slicing_mode = regular
; slowdown_below_layer_time = 20
; small_perimeter_speed = 25
; solid_infill_below_area = 0
; solid_infill_every_layers = 0
; solid_infill_extruder = 1
; solid_infill_extrusion_width = 0.45
; solid_infill_speed = 40
; spiral_vase = 0
; standby_temperature_delta = -5
; start_filament_gcode = "; Filament gcode\n"
; start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all\nG29 ; bedlevel\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0.0\nG1 Y190 E15.0 F1500.0 ; intro line\nG1 X2.3 F5000\nG1 Y10 E30 F1200.0 ; intro line\nG92 E0.0\nG1 Z15 F9000\nG1 Y100 F9000\nG1 X5 F9000
; support_material = 0
; support_material_angle = 0
; support_material_auto = 1
; support_material_bottom_contact_distance = 0
; support_material_bottom_interface_layers = -1
; support_material_buildplate_only = 1
; support_material_closing_radius = 2
; support_material_contact_distance = 0.1
; support_material_enforce_layers = 0
; support_material_extruder = 0
; support_material_extrusion_width = 0.38
; support_material_interface_contact_loops = 0
; support_material_interface_extruder = 0
; support_material_interface_layers = 2
; support_material_interface_pattern = rectilinear
; support_material_interface_spacing = 0.2
; support_material_interface_speed = 100%
; support_material_pattern = rectilinear
; support_material_spacing = 2
; support_material_speed = 40
; support_material_style = grid
; support_material_synchronize_layers = 0
; support_material_threshold = 45
; support_material_with_sheath = 0
; support_material_xy_spacing = 1
; temperature = 230
; template_custom_gcode = 
; thick_bridges = 1
; thin_walls = 0
; threads = 4
; thumbnails = 
; toolchange_gcode = 
; top_fill_pattern = rectilinear
; top_infill_extrusion_width = 0.4
; top_solid_infill_speed = 30
; top_solid_layers = 5
; top_solid_min_thickness = 0
; travel_speed = 150
; travel_speed_z = 0
; use_firmware_retraction = 0
; use_relative_e_distances = 1
; use_volumetric_e = 0
; variable_layer_height = 1
; wipe = 1
; wipe_into_infill = 0
; wipe_into_objects = 0
; wipe_tower = 0
; wipe_tower_bridging = 10
; wipe_tower_brim_width = 2
; wipe_tower_no_sparse_layers = 0
; wipe_tower_rotation_angle = 0
; wipe_tower_width = 60
; wipe_tower_x = 170
; wipe_tower_y = 140
; wiping_volumes_extruders = 70,70
; wiping_volumes_matrix = 0
; xy_size_compensation = 0
; z_offset = 0
; prusaslicer_config = end